Publishing details
Changelog
openvswitch-dpdk (2.4.0-0ubuntu1~cloud0) trusty-liberty; urgency=medium
* New package for the Ubuntu Cloud Archive.
openvswitch-dpdk (2.4.0-0ubuntu1) wily; urgency=medium
* Initial upload of cut-down DPDK enabled openvswitch package
(LP: #1487538):
- d/control,changelog: Rename source package, trim down to single
binary openvswitch-switch-dpdk for just x86 architectures.
- d/rules: Skip most of install - just install ovs-vswitchd.
- d/openvswitch-switch-dpdk.*: Install binary via alternatives
at a lower priority than the standard openvswitch-switch binary.
openvswitch (2.4.0-0ubuntu2) wily; urgency=medium
* Install ovs-vswitchd binary using alternatives for all architectures
to support use of alternative dpdk enabled binaries (LP: #1499759):
- d/rules: Move ovs-vswitchd to /usr/lib/openvswitch-switch.
- d/openvswitch-switch.{postinst,prerm}: Install binary using
alternatives.
openvswitch (2.4.0-0ubuntu1) wily; urgency=medium
* Update to 2.4.0 release from previous snapshot.
openvswitch (2.4.0~git20150810.97bab95-0ubuntu2) wily; urgency=medium
* d/rules: Skip unit tests on powerpc - see https://pad.lv/1483572 for
full details.
openvswitch (2.4.0~git20150810.97bab95-0ubuntu1) wily; urgency=medium
* New upstream snapshot from 2.4 branch:
- d/*: Align any relevant packaging changes with upstream.
* d/*: wrap-and-sort.
* d/openvswitch-{common,vswitch}.install: Correct install location for
bash completion files.
* d/tests/openflow.py: Explicitly use ovs-testcontroller as provided
by 2.4.0 release.
openvswitch (2.3.2-0ubuntu3) wily; urgency=medium
* d/tests/openflow.py: Use net.addLink to add links between switches and
hosts to ensure that they get cleanup up after use, fixing autopkgtest
failures.
openvswitch (2.3.2-0ubuntu2) wily; urgency=medium
* d/p/rules: Skip test 717 due to failure on powerpc - see
http://pad.lv/1472202 for full details.
openvswitch (2.3.2-0ubuntu1) wily; urgency=medium
* New upstream point release.
* Refresh all patches.
openvswitch (2.3.1-0ubuntu1) vivid; urgency=low
* New upstream release.
* d/rules,*.manpages: Rewrite to use more standard debhelper sequencing.
* d/automake.mk,openvswitch-switch.default,rules:
Rename openvswitch-switch.template -> openvswitch-switch.default.
* Enable systemd support:
- d/openvswitch-switch.service,
d/openvswitch-switch.openvswitch-nonetwork.service:
Systemd unit files, derived from RHEL versions.
- d/control: Add BD on dh-systemd.
- d/rules: Enable systemd helper, explicit no-start install of
openvswitch-nonetwork unit.
- d/ifupdown.sh: Tweak to support use with systemd ifinstalled.
* d/control: Bumped Standards-Version 3.9.6, no changes.
* d/tests/common: Drop module reload checks, as we always use the
in-tree kernel module now.
* d/python-openvswitch.*,openvswitch-test.*,automake.mk:
Tidy up install of Python components.
openvswitch (2.3.0+git20140819-2ubuntu2) vivid; urgency=medium
* Resolve DEP-8 test failures:
- d/tests/openflow.py: Explicitly configure switches to use
OpenFlow 1.0 protocol.
- d/tests/control: Version dependency on mininet >= 2.2.0~
to support specification of protocol version.
* d/tests/openflow.py: format to flake8 standard.
openvswitch (2.3.0+git20140819-2ubuntu1) vivid; urgency=medium
* Merge from Debian unstable, remaining changes:
- d/control,tests: Add autopkg tests.
- d/control,openvswitch-testcontroller*: Add binary package for
test controller to support use with mininet.
- d/rules,*.upstart: Add upstart configurations for openvswitch-switch.
- d/p/xcp-interface-reconfigure.patch: Add support for Debian
packaged xcp-xapi if found.
- d/rules: Ensure dh_autoreconf_clean is called.
- d/rules: Add helper for generating snapshot from upstream git repo.
- d/control,compat: Bump debhelper compat level to 9.
- d/control: Bump Standards-Version to 3.9.5, no changes.
- d/control: Add alternative dependency - kmod | module-init-tools.
* d/control: Add missing ${shlibs:Depends} to openvswitch-testcontroller.
* d/tests/*: Drop dkms and module assistant tests now that we no longer
ship the datapath kernel module.
* d/rules: Align snapshot creation to new repo location and 2.3 branch.
openvswitch (2.3.0+git20140819-2) unstable; urgency=low
* debian/rules: Rerun checks on tests that fail the first time. Skip
tests 711, 712, and 713 that seem to fail due to races on buildds.
* debian/patches/cfm-avoid-long-delay: Upstream patch to avoid
test failures in CFM tests due to "long delay" log messages at WARN level.
* debian/patches/ovs-appctl-log-options.patch,
debian/patches/disable-poll-loop-logging-for-long-output.patch:
Upstream patches to avoid test failures in tests that generate a ton
of output.
openvswitch (2.3.0+git20140819-1) unstable; urgency=low
* New upstream release:
- OpenFlow 1.1, 1.2, and 1.3 are now enabled by default in
ovs-vswitchd.
- Linux kernel datapath now has an exact match cache optimizing the
flow matching process.
- Datapath flows now have partially wildcarded tranport port field
matches. This reduces userspace upcalls, but increases the
number of different masks in the datapath. The kernel datapath
exact match cache removes the overhead of matching the incoming
packets with the larger number of masks, but when paired with an
older kernel module, some workloads may perform worse with the
new userspace.
* Removed datapath packages because Linux 3.16 has adequate built-in
support. Closes: #740983.
- debian/control: Remove datapath package references. Add build
dependency on dh-autoreconf.
- debian/rules: Don't build datapath packages.
- debian/openvswitch-datapath-*: Removed.
- debian/control.modules.in: Removed.
- debian/dkms.conf.in: Removed.
- debian/rules.modules: Removed.
- debian/openvswitch-switch.README.Debian: Removed references to kernel
packages.
- debian/openvswitch-switch.init: Removed references to kernel packages.
- debian/automake.mk: Remov references to deleted files.
- debian/rules: Adopt use of dh-autoreconf.
openvswitch (2.3.0-1) unstable; urgency=low
[ Open vSwitch team ]
* New upstream version
- OpenFlow 1.1, 1.2, and 1.3 are now enabled by default in
ovs-vswitchd.
- Linux kernel datapath now has an exact match cache optimizing the
flow matching process.
- Datapath flows now have partially wildcarded tranport port field
matches. This reduces userspace upcalls, but increases the
number of different masks in the datapath. The kernel datapath
exact match cache removes the overhead of matching the incoming
packets with the larger number of masks, but when paired with an
older kernel module, some workloads may perform worse with the
new userspace.
openvswitch (2.2.0-1) unstable; urgency=low
[ Open vSwitch team ]
* New upstream version
- Internal ports are no longer brought up by default, because it
should be an administrator task to bring up devices as they are
configured properly.
- ovs-vsctl now reports when ovs-vswitchd fails to create a new port or
bridge.
- The "ovsdbmonitor" graphical tool has been removed, because it was
poorly maintained and not widely used.
- New "check-ryu" Makefile target for running Ryu tests for OpenFlow
controllers against Open vSwitch. See INSTALL for details.
- Added IPFIX support for SCTP flows and templates for ICMPv4/v6 flows.
- Upon the receipt of a SIGHUP signal, ovs-vswitchd no longer reopens its
log file (it will terminate instead). Please use 'ovs-appctl vlog/reopen'
instead.
- Support for Linux kernels up to 3.14. From Kernel 3.12 onwards OVS uses
tunnel API for GRE and VXLAN.
- Added experimental DPDK support.
- Added support for custom vlog patterns in Python
openvswitch (2.1.3-0ubuntu1) utopic; urgency=medium
* New upstream release.
* d/control: Drop hardening-wrapper from build Depends.
* d/compat,control: Bump debhelper compat level to 9.
openvswitch (2.1.2-0ubuntu3) utopic; urgency=medium
* Ensure test-controller is built on all architectures:
- d/control: Introduce new openvswitch-testcontroller package.
- d/{openvswitch-testcontroller,openvswitch-test}.{install,manpages}:
Move test-controller binary to new testcontroller package.
- d/tests/control: Use openvswitch-testcontroller instead of
openvswitch-test.
openvswitch (2.1.2-0ubuntu2) utopic; urgency=high
* No change rebuild against new dh_installinit, to call update-rc.d at
postinst.
openvswitch (2.1.2-0ubuntu1) utopic; urgency=medium
* New upstream release:
- d/*: Resync packaging with upstream:
+ Drop openvswitch-{controller,pki} and ovsdbmonitor packages.
+ Drop openvswitch-pki targets from automake.mk.
+ Add openvswitch-vtep package.
- d/tests/control,common: Drop use of openvswitch-controller in
preference of openvswitch-test.
- d/openvswitch-test.{install,manpages}: Provide test-controller
for continued use by mininet for ovs testing.
openvswitch (2.1.0+git20140411-3) unstable; urgency=low
* debian/rules: Disable some tests that tend to fail on Debian buildds
due to race conditions.
openvswitch (2.1.0+git20140411-2) unstable; urgency=low
* debian/openvswitch-switch.postinst: Add back mysteriously deleted
"mkdir" line. Closes: #744769. Thanks to Joshua Powers for reporting
this bug.
* debian/rules: Try rechecking in serial any tests that fail in
parallel, as an experiment to see whether this fixes remaining buildd
test failures.
openvswitch (2.1.0+git20140411-1) unstable; urgency=low
* New upstream release:
- Removed ovsdbmonitor package. Closes: #744136.
- Fix misaligned data accesses that caused test failures.
* tests/ofproto-macros.at: Disable scanning logs for WARN and ERR messages,
as an experiment to see whether this fixes all the buildd test failures.
openvswitch (2.1.0+git20140325-1) unstable; urgency=low
* New upstream release.
- Included kernel module builds against Linux 3.11. Closes: #732260.
- Log rotation bug fixed. Closes: #729304.
- Bridge compatibility feature removed. Closes: #680538, #681954.
- Controller package removed. Closes: #731133.
* Shut down OVS after libvirt guests to allow those guests to remove
their interfaces gracefully. Closes: #701760. Reported by Ernesto
Domato <email address hidden>. Fix from Lukasz Szotek
<email address hidden>.
* debian/control: Depend on kmod instead of module-init-tools. Closes:
#733696. Reported by <email address hidden> (Marco d'Itri).
openvswitch (2.0.1+git20140120-0ubuntu2) trusty; urgency=medium
* Rebuild to drop files installed into /usr/share/pyshared.
openvswitch (2.0.1+git20140120-0ubuntu1) trusty; urgency=medium
* New upstream snapshot:
- d/p/0001-Add-check-for-latomic.patch: Dropped - included in snapshot.
* d/p/fix-3.11-support.patch: Cherry pick fix for >= 3.11 GRE support
from upstream VCS (LP: #1270649).
* d/tests/dkms,ma: Gate test execution on <= 3.13 kernel.
openvswitch (2.0.1+git20140106-0ubuntu1) trusty; urgency=medium
* New upstream snapshot.
openvswitch (2.0.0+git20131203-0ubuntu1) trusty; urgency=low
* New upstream snapshot.
* d/rules: Switch snapshot branch to branch-2.0.
* Rework checks for -latomic:
- d/p/0001-Add-check-for-latomic.patch: Add autoconf checks to see
if -latomic is required when linking test-atomic.
- d/p/atomic-test.patch: Dropped in preference to new patch.
openvswitch (2.0.0-0ubuntu3) trusty; urgency=low
* d/rules,control: Switch to using dh-autoreconf for clean package builds.
* d/p/kernel-3.12-support.patch: Add support for 3.12 kernel.
* d/tests/control,kernel,common: Add kernel test to exercise in-tree
openvswitch module, run openflow test against all module sources instead
of standalone at the end of other tests.
openvswitch (2.0.0-0ubuntu2) trusty; urgency=low
* d/p/atomic-test.patch: Link atomic test with -latomic for powerpc.
openvswitch (2.0.0-0ubuntu1) trusty; urgency=low
* New upstream release:
- d/p/kernel-3.11-support.patch: Cherry picked fix from upstream VCS
for 3.11 kernel support.
- Drop all other patches, no longer required.
* d/p/xcp-interface-reconfigure.patch: Detect and use packaged XCP XAPI
interface-reconfigure hook if installed (LP: #1195053).
openvswitch (1.10.2-0ubuntu2) saucy; urgency=low
* d/p/boot.patch: Re-execution of boot.sh to ensure that new files
introduced via patches are included in the dkms and source packages
(LP: #1229222).
openvswitch (1.10.2-0ubuntu1) saucy; urgency=low
* New upstream point release.
openvswitch (1.10.1+git20130823-0ubuntu3) saucy; urgency=low
* d/openvswitch-switch.openvswitch-force-reload-kmod.upstart: Deal with
instances where openvswitch-switch is not already running, use
modprobe -r instead of rmmod to remove kernel modules.
openvswitch (1.10.1+git20130823-0ubuntu2) saucy; urgency=low
* Fully support transitions from openvswitch module in 3.11 kernel to
DKMS module:
- d/openvswitch-switch.openvswitch-force-reload-mod.upstart: Drop the
gre module when force reloading to make transitions from native kernel
module to dkms module work.
- d/NEWS: Drop information about DKMS/kernel compatibility with GRE
tunnels.
openvswitch (1.10.1+git20130823-0ubuntu1) saucy; urgency=low
* New upstream snapshot.
- d/p/*.patch: Rebase on 1.10 branch with upstream submitted fixes
for Linux 3.11 kernel compatibility (LP: #1213879).
- d/NEWS: Add note about GRE tunnel support in the Linux 3.11 native
kernel module with advice on use of -dkms package in this configuration.
* Add Upstart configuration for openvswitch-switch (LP: #1084028):
- d/openvswitch-switch.upstart: Add upstart configuration to support
use during early boot.
- d/rules,openvswitch-switch.openvswitch-force-reload-mod.upstart: Add
helper to replace 'service openvswitch-switch force-reload-kmod'.
- d/openvswitch-switch.preinst: Stop versions earlier than this version
prior to install due to switch to upstart configuration.
- d/NEWS: Let users know about this change and how to force a reload
of the openvswitch kernel module.
- d/tests/dkms,common: Update to work with upstart configuration.
openvswitch (1.10.1+git20130627-0ubuntu2) saucy; urgency=low
* Allow compile with Linux 3.11 kernel
- d/p/0005-datapath-Allow-compile-with-linux-3.11.patch
Extend version checking to include the new kernel version.
openvswitch (1.10.1+git20130627-0ubuntu1) saucy; urgency=low
* New upstream snapshot:
- d/p/0007-tests-Tolerate-init-process-pid-1.patch: Dropped; included
in snapshot.
- d/p/*lacp*: Drop patches related to lacp test changes; not required
for this series.
- d/*: Sync relevant packaging changes.
* Provide initial support for Linux 3.10 kernel:
- d/p/0004-datapath-Fixup-compatibility-with-linux-3.10.patch:
Fixup compatibility with Linux 3.10; this is not full support for
all new 3.10 features - it simply maintains compatibility for the
existing codebase.
* d/rules: Add get-orig-snapshot target for creating snapshots from
upstream VCS.
openvswitch (1.10.0-0ubuntu5) saucy; urgency=low
* d/p/0007-tests-Tolerate-init-process-pid-1.patch: Resync with upstream
accepted fix for FTBFS with upstart user sessions enabled, supercedes
fix-init-user-sessions.patch with a more reliable test.
openvswitch (1.10.0-0ubuntu4) saucy; urgency=low
* Fix FTBFS when upstart user sessions are enabled:
- d/p/fix-init-user-sessions.patch: init is not pid == 1 when building
on Ubuntu with user sessions enabled; just check that the cmd name
of the init process is 'init' instead.
openvswitch (1.10.0-0ubuntu3) saucy; urgency=low
* d/rules: Disable testing on powerpc architecture
https://bugs.launchpad.net/ubuntu/+source/openvswitch/+bug/1189408.
openvswitch (1.10.0-0ubuntu2) saucy; urgency=low
* Fix FTBFS on powerpc architecture:
- d/p/{0004,0005,0006}*.patch: Cherry picked fixes from upstream VCS
for failing lacp test.
openvswitch (1.10.0-0ubuntu1) saucy; urgency=low
* New upstream release:
- d/p/handle-unix-socket-long-paths.patch: Dropped - included
upstream.
- d/control,NEWS: Drop openvswitch-brcompat package as feature has
been dropped upstream, added NEWS entry to let users know.
- d/tests: Update tests to drop brcompat module testing.
* Add support for Linux 3.9 kernel (LP: #1180385):
- d/p/0001-datapath-hlist-drop-the-node-parameter-from-iterator.patch:
Cherry picked fix from upstream master branch to remove dropped
node parameter from hlist calls.
- d/p/0002-Add-support-for-linux-3.9-kernel.patch:
Include the 3.9 kernel in the list of supported kernel versions.
- d/p/0003-datapath-Backport-simplified-hlist-iterators.patch:
Cherry picked fix to provide backported hlist iterators for older
kernels.
- d/rules: Always run boot.sh to pickup above changes.
openvswitch (1.9.3+git20131029-1) unstable; urgency=low
* New upstream release.
- Fixes opening Unix sockets with very long names from Python.
openvswitch (1.9.3+git20131028-1) unstable; urgency=low
* New upstream release.
- Fixes "make check" with non-ASCII characters in present working
directory. Closes: #719736.
openvswitch (1.9.3+git20131021-1) unstable; urgency=low
* New upstream version:
- Fixes unaligned access issues in bug #719736.
- Other bug fixes.
* Other half of bug #719736 has probably not been addressed. I don't
understand it and want to see if it recurs in the autobuilders with
the unaligned accesses fixed.
openvswitch (1.9.3-1) unstable; urgency=low
[ Open vSwitch team ]
* New upstream version
- Bug fixes
openvswitch (1.9.2+git20130813-1) unstable; urgency=low
* New upstream version. Closes: #701758.
- debian/patches: All patches dropped because they have been
incorporated upstream.
- Supports kernels up to 3.8. Closes: #710125.
openvswitch (1.9.2-1) unstable; urgency=low
[ Open vSwitch team ]
* New upstream version
- Bug fixes
openvswitch (1.9.1-1) unstable; urgency=low
[ Open vSwitch team ]
* New upstream version
- Bug fixes
openvswitch (1.9.0-1) unstable; urgency=low
[ Open vSwitch team ]
* New upstream version
- Datapath:
- Support for ipv6 set action.
- SKB mark matching and setting.
- support for Linux kernels up to 3.8
- FreeBSD is now a supported platform, thanks to code contributions from
Gaetano Catalli, Ed Maste, and Giuseppe Lettieri.
- ovs-bugtool: New --ovs option to report only OVS related information.
- New %t and %T log escapes to identify the subprogram within a
cooperating group of processes or threads that emitted a log message.
The default log patterns now include this information.
- OpenFlow:
- Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL
fields in IPv6 neighbor discovery messages, and IPv6 flow label.
- Adds support for writing to the metadata field for a flow.
- Tunneling:
- The tunneling code no longer assumes input and output keys are
symmetric. If they are not, PMTUD needs to be disabled for
tunneling to work. Note this only applies to flow-based keys.
- New support for a nonstandard form of GRE that supports a 64-bit key.
- Tunnel Path MTU Discovery default value was set to 'disabled'.
This feature is deprecated and will be removed soon.
- Tunnel header caching removed.
- ovs-ofctl:
- Commands and actions that accept port numbers now also accept keywords
that represent those ports (such as LOCAL, NONE, and ALL). This is
also the recommended way to specify these ports, for compatibility
with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers
for these ports for different purposes).
- ovs-dpctl:
- Support requesting the port number with the "port_no" option in
the "add-if" command.
- ovs-pki: The "online PKI" features have been removed, along with
the ovs-pki-cgi program that facilitated it, because of some
alarmist insecurity claims. We do not believe that these claims
are true, but because we do not know of any users for this
feature it seems better on balance to remove it. (The ovs-pki-cgi
program was not included in distribution packaging.)
- ovsdb-server now enforces the immutability of immutable columns. This
was not enforced in earlier versions due to an oversight.
- The following features are now deprecated. They will be removed no
earlier than February 2013. Please email <email address hidden> with
concerns.
- Bridge compatibility.
- Stable bond mode.
- The autopath action.
- Interface type "null".
- Numeric values for reserved ports (see "ovs-ofctl" note above).
- Tunnel Path MTU Discovery.
- CAPWAP tunnel support.
- The data in the RARP packets can now be matched in the same way as the
data in ARP packets.
openvswitch (1.9.0-0ubuntu1) raring; urgency=low
* New upstream release.
* Added watch file.
openvswitch (1.9.0~git20130225.cec7c9e-0ubuntu1) raring; urgency=low
* New upstream snapshot.
* d/rules.modules: Install built modules to updates/openvswitch to ensure
that they override any kernel provided version of openvswitch.
openvswitch (1.9.0~git20130207.84b39f2-0ubuntu2) raring; urgency=low
* Add DEP-8 tests for dkms, module-assistant and openflow.
openvswitch (1.9.0~git20130207.84b39f2-0ubuntu1) raring; urgency=low
* New upstream snapshot from 1.9 branch:
- d/p/support-linux-3.8.patch,
d/p/linux-Makefile.main.in-acinclude-preparation-for-lin.patch:
Dropped as included upstream.
* Fix dependencies for ovsdbmonitor (LP: #1098324):
- d/control: Add dependency on python-twisted-conch.
* d/control: Bumped Standards-Version, no changes.
openvswitch (1.9.0~git20130115.ca71f5b-0ubuntu2) raring; urgency=low
* Fix typo in debian/openvswitch-controller.default (LP: #1094556).
openvswitch (1.9.0~git20130115.ca71f5b-0ubuntu1) raring; urgency=low
* New upstream snapshot based on branch-1.9:
- d/patches: Dropped all previous patches as all found upstream.
- d/*: Synced packaging with upstream packaging changes.
- d/control: Add libtool to BD's to support use of snapshot.
* Fix compatibility with Linux 3.8 (LP: #1098650):
- d/p/support-linux-3.8.patch:
Accept Linux 3.8 as a compatible kernel version.
- d/p/linux-Makefile.main.in-acinclude-preparation-for-lin.patch:
Adjust autoconf checks to correctly detect new kernel header file names.
* Fix python test issues caused by long UNIX socket paths:
- d/p/handle-unix-socket-long-paths.patch:
Workaround long UNIX socket paths by using /proc/self/fd on Linux.
openvswitch (1.8.0-1) unstable; urgency=low
[ Open vSwitch team ]
* New upstream version
*** Internal only release ***
- New FAQ. Please send updates and additions!
- Authors of controllers, please read the new section titled "Action
Reproduction" in DESIGN, which describes an Open vSwitch change in
behavior in corner cases that may affect some controllers.
- ovs-l3ping:
- A new test utility that can create L3 tunnel between two Open
vSwitches and detect connectivity issues.
- ovs-ofctl:
- New --sort and --rsort options for "dump-flows" command.
- "mod-port" command can now control all OpenFlow config flags.
- OpenFlow:
- Allow general bitwise masking for IPv4 and IPv6 addresses in
IPv4, IPv6, and ARP packets. (Previously, only CIDR masks
were allowed.)
- Allow support for arbitrary Ethernet masks. (Previously, only
the multicast bit in the destination address could be individually
masked.)
- New field OXM_OF_METADATA, to align with OpenFlow 1.1.
- The OFPST_QUEUE request now reports an error if a specified port or
queue does not exist, or for requests for a specific queue on all
ports, if the specified queue does not exist on any port. (Previous
versions generally reported an empty set of results.)
- New "flow monitor" feature to allow controllers to be notified of
flow table changes as they happen.
- Additional protocols are not mirrored and dropped when forward-bpdu is
false. For a full list, see the ovs-vswitchd.conf.db man page.
- Open vSwitch now sends RARP packets in situations where it previously
sent a custom protocol, making it consistent with behavior of QEMU and
VMware.
- All Open vSwitch programs and log files now show timestamps in UTC,
instead the local timezone, by default.
openvswitch (1.7.0-1) unstable; urgency=low
[ Open vSwitch team ]
* New upstream version
- kernel modules are renamed. openvswitch_mod.ko is now
openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
- Increased the number of NXM registers to 8.
- Added ability to configure dscp setting for manager and controller
connections. By default, these connections have a DSCP value of
Internetwork Control (0xc0).
- Added the granular link health statistics, 'cfm_health', to an
interface.
- OpenFlow:
- Added support to mask nd_target for ICMPv6 neighbor discovery flows.
- Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
multipart messages.
- ovs-ofctl:
- Added the "dump-ports-desc" command to retrieve port
information using the new port description multipart messages.
- ovs-test:
- Added support for spawning ovs-test server from the client.
- Now ovs-test is able to automatically create test bridges and ports.
- "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
- Tripled flow setup performance.
- The "coverage/log" command previously available through ovs-appctl
has been replaced by "coverage/show". The new command replies with
coverage counter values, instead of logging them.
openvswitch (1.6.1-1) unstable; urgency=low
[ Open vSwitch team ]
* New upstream version
- Allow OFPP_CONTROLLER as the in_port for packet-out messages.
openvswitch (1.6.0-1) unstable; urgency=low
[ Open vSwitch team ]
* New upstream version
- bonding
- LACP bonds no longer fall back to balance-slb when negotiations fail.
Instead they drop traffic.
- The default bond_mode changed from SLB to active-backup, to protect
unsuspecting users from the significant risks of SLB bonds (which are
documented in vswitchd/INTERNALS).
- Load balancing can be disabled by setting the bond-rebalance-interval
to zero.
- OpenFlow:
- Added support for bitwise matching on TCP and UDP ports.
See ovs-ofctl(8) for more information.
- NXM flow dumps now include times elapsed toward idle and hard
timeouts.
- Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
controllers more precise control over which OpenFlow messages they
receive asynchronously.
- New "fin_timeout" action.
- Added "fin_timeout" support to "learn" action.
- The default MAC learning timeout has been increased from 60 seconds
to 300 seconds. The MAC learning timeout is now configurable.
- When QoS settings for an interface do not configure a default queue
(queue 0), Open vSwitch now uses a default configuration for that
queue, instead of dropping all packets as in previous versions.
- Logging to console and file will have UTC timestamp as a default for all
the daemons. An example of the default format is 2012-01-27T16:35:17Z.
ovs-appctl can be used to change the default format as before.
- New support for limiting the number of flows in an OpenFlow flow
table, with configurable policy for evicting flows upon
overflow. See the Flow_Table table in ovs-vswitch.conf.db(5)
for more information.
- New "enable-async-messages" column in the Controller table. If set to
false, OpenFlow connections to the controller will initially have all
asynchronous messages disabled, overriding normal OpenFlow behavior.
- ofproto-provider interface:
- "struct rule" has a new member "used" that ofproto implementations
should maintain by updating with ofproto_rule_update_used().
- ovsdb-client:
- The new option --timestamp causes the "monitor" command to print
a timestamp with every update.
- CFM module CCM broadcasts can now be tagged with an 802.1p priority.
openvswitch (1.5.0-1) unstable; urgency=low
[ Open vSwitch team ]
* New upstream version
- OpenFlow:
- Added support for querying, modifying, and deleting flows
based on flow cookie when using NXM.
- Added new NXM_PACKET_IN format.
- ovs-ofctl:
- Added daemonization support to the monitor and snoop commands.
- ovs-vsctl:
- The "find" command supports new set relational operators
{=}, {!=}, {<}, {>}, {<=}, and {>=}.
- ovsdb-tool now uses the typical database and schema installation
directories as defaults.
openvswitch (1.4.3-0ubuntu2) quantal-proposed; urgency=low
* Re-enable the openvswitch-datapath-dkms package to enable support
for gre tunnels between virtual switches which is not supported
in the kernel provided openvswitch module (LP: #1068365).
- d/patches/0001->0008*.patch: Cherry picked patches from upstream
trunk which enable support for the 3.5 linux kernel and align
dkms module naming with kernel module naming.
- d/dkms.conf.in: Drop _mod postfix from dkms module names.
openvswitch (1.4.3-0ubuntu1) quantal; urgency=low
* New upstream release (LP: #1057098).
* Dropped Debian patches:
- debian/patches/debian-changes-1.4.2+git20120612-6
- debian/patches/bug-681955-ovs-ctl-Start-the-rest-of-Open-vSwitch.patch
- debian/patches/bug-684057-ovs-ctl-Add-support-for-newer-module-name.patch
- debian/patches/debian-changes-1.4.2+git20120612-9
* Dropped Ubuntu patches:
- debian/patches/lp1044318-Reset-upper-layer-protocol-info.patch
* Remaining changes:
- debian/rules, debian/control: Enable hardening wrapper.
- debian/control: Disable openvswitch-datapath-dkms package.
openvswitch (1.4.2+git20120612-9ubuntu3) quantal; urgency=low
* debian/patches/lp1044318-Reset-upper-layer-protocol-info.patch: Cherry
picked upstream patch to avoid critical issues with SNAT/DNAT when OVS
is chained with other Linux components. May be dropped with 1.4.3 upload.
(LP: #1044318)
openvswitch (1.4.2+git20120612-9ubuntu2) quantal; urgency=low
* debian/rules, debian/control: Enable hardening wrapper.
openvswitch (1.4.2+git20120612-9ubuntu1) quantal; urgency=low
* Merge from Debian unstable; remaining changes:
- d/control: Disable openvswitch-datapath-dkms package.
* Dropped changes:
- d/patches/kernel_3.5_support.patch: Superceded by
bug-684057-ovs-ctl-Add-support-for-newer-module-name.patch
openvswitch (1.4.2+git20120612-9) unstable; urgency=low
* Apply bug-684057-ovs-ctl-Add-support-for-newer-module-name.patch to
allow use of the openvswitch kernel module integrated into 3.3 and
later. Closes: #684057.
openvswitch (1.4.2+git20120612-8) unstable; urgency=low
* Apply further patches to fix bugs resulting from moving
/etc/openvswitch/conf.db to /var/lib/openvswitch in -7.
This required applying the following bug fix patches:
bug-681880-3-Make-the-location-of-the-database-separately-configu.patch
bug-681880-4-tests-Slightly-generalize-utility-function-tests.patch
bug-681880-5-util-New-function-follow_symlinks.patch
bug-681880-6-lockfile-Be-more-forgiving-about-lockfiles-for-symli.patch
bug-681880-7-ovsdb-Do-not-replace-symlinks-by-regular-files-durin.patch
bug-681880-8-Fix-a-typo-in-commit-f973f2af2.patch
bug-681880-9-dirs-dbdir-default-must-be-based-on-sysconfdir.patch
* debian/rules: Configure /var/lib/openvswitch as the database directory
instead of working through symlinks. (The symlinks are still created
for compatibility with people and existing software that are
accustomed to seeing the database in its original location, but the
Debian packages themselves never use the symlinks.)
* debian/openvswitch-switch.postrm: Also remove
/ec/openvswitch/system-id.conf and conf.db backups on purge.
* utilities/ovs-pki.in: Use mode 0700 instead of 0733 for
openvswitch-pki "incoming" directory, by applying
bug-683665-use-mode-700-for-pki-incoming-dir.patch. See the patch for
complete rationale. Closes: #683665. Thanks to Andreas Beckmann
<email address hidden> for reporting this bug.
* debian/openvswitch-pki.postinst: Change mode of existing "incoming"
directories to 0700 at configure time (see above).
openvswitch (1.4.2+git20120612-7) unstable; urgency=low
* Move /etc/openvswitch/conf.db to /var/lib/openvswitch, using symlinks.
Closes: #681880. Thanks to Bastian Blank <email address hidden> for
reporting this bug.
This required applying the following bug fix patches:
bug-681880-1-lockfile-Fix-hang-locking-through-a-dangling-symlink.patch
bug-681880-2-ovsdb-Make-ovsdb-tool-create-work-through-a-dangling.patch
* Start the rest of OVS if bridge compatibility is enabled but the
kernel bridge module cannot be loaded. Closes: #681955. Thanks to
Bastian Blank <email address hidden> for reporting this bug.
This was fixed by applying the following bug fix patch:
bug-681955-ovs-ctl-Start-the-rest-of-Open-vSwitch.patch
openvswitch (1.4.2+git20120612-6) unstable; urgency=low
* utilities/automake.mk: Fix duplicate mention of ovs-vsctl in
bin_PROGRAMS and bin_SCRIPTS; it should only have been in the former.
Closes: #682384. Thanks to Bastian Blank <email address hidden> for
reporting this bug.
openvswitch (1.4.2+git20120612-5) unstable; urgency=low
* debian/openvswitch-controller.postrm: Remove configuration files in
/etc/openvswitch-controller on purge. Closes: #682187. Thanks to
Andreas Beckmann <email address hidden> for reporting this bug.
openvswitch (1.4.2+git20120612-4ubuntu1) quantal; urgency=low
* Merge from Debian unstable. Remaining changes:
- d/control: Disable openvswitch-datapath-dkms package.
- d/patches/kernel_3.5_support.patch: Fix openvswitch-switch startup
with 3.5 kernel module name, allowing use of openvswitch without
openvswitch-datapath-dkms.
openvswitch (1.4.2+git20120612-4) unstable; urgency=low
* debian/openvswitch-switch.init: Do not modify iptables rules. Closes:
#680537. Thanks to Bastian Blank <email address hidden> for reporting
this bug.
openvswitch (1.4.2+git20120612-3ubuntu1) quantal; urgency=low
* Merge from Debian unstable. Remaining changes:
- d/control: Disable openvswitch-datapath-dkms package.
- d/patches/kernel_3.5_support.patch: Fix openvswitch-switch startup
with 3.5 kernel module name, allowing use of openvswitch without
openvswitch-datapath-dkms.
openvswitch (1.4.2+git20120612-3) unstable; urgency=low
* debian/control: Add "netbase" dependency to ensure that /etc/protocols
is available. Closes: #680537. Thanks to Bastian Blank <email address hidden>
for reporting this bug.
openvswitch (1.4.2+git20120612-2ubuntu2) quantal; urgency=low
* Disable openvswitch-datapath-dkms package (LP: #1018265); it's not
compatible with the 3.5 kernel (which provides the openvswitch module)
and if users really required the brcompat module and are using an older
kernel then they can use openvswitch-datapath-source.
openvswitch (1.4.2+git20120612-2ubuntu1) quantal; urgency=low
* Fix openvswitch-switch startup with 3.5 kernel module name, allowing
use of openvswitch without openvswitch-datapath-dkms (LP: #1021078):
- d/patches/kernel_3.5_support.patch: Cherry picked patch from upstream
VCS to align module naming with openvswitch module in 3.5 kernel.
openvswitch (1.4.2+git20120612-2) unstable; urgency=low
* Apply upstream commit that enables DKMS to automatically build for the
running kernel, which seems to be common practice in DMS packaging
(launchpad bug #962189)
openvswitch (1.4.2+git20120612-1) unstable; urgency=low
* New upstream version fixing the following bugs:
o Crash fixes:
- ofproto: Fix use after free in ofoperation_complete().
- odp-util: Update ODPUTIL_FLOW_KEY_BYTES for current kernel flow format.
- datapath: Check correct return value from skb_gso_segment().
o Possible serious malfunctions:
- dpif-netdev: allow for proper destruction of netdev datapaths.
- datapath: Validation of IPv6 set port action uses IPv4 header.
o Rare annoying corner case:
- odp-util: Fix parsing of actions encapsulated within "sample" actions.
o Bugs with unknown impact:
- Correctly set destination MAC in mf_set_flow_value().
o OpenFlow controller compatibility:
- Allow OFPP_CONTROLLER as the in_port for packet-out messages.
openvswitch (1.4.0+git20120426-1) unstable; urgency=low
* New upstream release fixing the following bugs:
o Broken log rotation.
o Use-after-free error when ports disappear.
o Minor memory leaks.
o Testsuite failures on big-endian architectures.
openvswitch (1.4.0+git20120321-1) unstable; urgency=low
* New upstream version including:
o Features:
- ovs-vsctl: Allow "fake bridges" to be created for VLAN 0.
- vswitchd: Make the MAC entry aging time configurable.
- mac-learning: Increase MAC learning timeout to 300 seconds.
o Bug fixes:
- netdev-linux: Fix use-after-free when netdev_dump_queues() deletes
queues.
- netlink-socket: Increase Netlink socket receive buffer size.
- ofproto: Fix code that keeps track of MTU.
- ovs-monitor-ipsec: Detect correctly IPSEC configuration changes
- bond: Incorrectly reported an error in appctl.
- socket-util: Unlink Unix domain sockets that bind but fail to connect.
- bridge: Remove unwanted ports at time of ofproto creation.
- dpif-linux: Make dpif_linux_port_query_by_name() query only one
datapath.
- ofproto-dpif: Cleanup STP on ports when disabled on their bridge.
- configure: Try to extract kernel source directory from build Makefile.
- vswitchd: Always configure a default queue for QoS.
- ofproto-dpif: Don't output to in_port even if in_port is OFPP_LOCAL.
- sflow_agent: Use snprintf() in place of sprintf().
o Packaging:
- Move PKI directory to FHS-compliant location. Closes: #661090.
Thanks to Andreas Beckmann <email address hidden> for reporting
this bug.
- Use a different way to avoid failing install without kernel module.
- Avoid unit test failure when doing "unofficial" builds.
- Bump standards-version to 3.9.3.
- Remove some useless files from the dkms package.
- Clean .pyc files in "clean" target.
- Remove po-debconf build dependency.
- Build-depend on python-all to pull in all Python versions.
- Add missing ${python:Depends} to openvswitch-test package.
- Improve long descriptions so as to better describe the packages.
- Bump debhelper compat level to 8 and make build-depends consistent.
- Fix exit status of openvswitch-switch init script "status" command.
- Use provided kernel source dir instead of host kernel version.
- Do not run "make" if "configure" fails during DKMS build.
- Look in /lib/modules instead of /usr/src for DKMS kernel sources.
- Fix dependencies for openvswitch-datapath-dkms package.
- Don't install Python modules for obsolete Python versions.
- Add dependency on ${misc:Depends} to openvswitch-test
o Documentation improvements:
- ovsdb-doc: Use minus sign in negative numbers in nroff output.
- ovsdb-doc: Convert '-' preceding a number as a minus sign, not a
hyphen.
- ovsdb-doc: Put NAME section into generated manpage.
- Fix typo in manpage.
- vswitchd: Document behavior of 802.1p priorities with VLAN splinters.
- netdev: Fix typo in error message.
- INSTALL.Linux: minor typo
* Many thanks to Thomas Goirand <email address hidden> for contributing many
of the packaging fixes listed above.
* This version fixes most of the lintian errors described in bug
#663051, but a few remain, so this upload does not close that bug. I
believe that this upload should be suitable for downgrading that bug's
severity.
openvswitch (1.4.0-2+nmu1) unstable; urgency=low
* Non maintainer upload.
* Removes all patches in debian/patches, because they are patching stuff
inconditionally in debian/*, and this should be applied by default.
* Uses the correct ${kernel_source_dir} in debian/dkms.conf.in, so that
the kernel module builds as expected (Closes: #659685).
openvswitch (1.4.0-2) unstable; urgency=low
* Use explicit DKMS variable for kernel source directory
- 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch
- 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch
- 0001-debian-Use-provided-kernel-source-dir.patch
- 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch
- (closes: #659685)
* Don't install Python modules for obsolete Python versions
- 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch
openvswitch (1.4.0-1) unstable; urgency=low
[ Open vSwitch team ]
* New upstream version
- Compatible with Open vSwitch kernel module included in Linux 3.3.
- New "VLAN splinters" feature to work around buggy device drivers
in old Linux versions. (This feature is deprecated. When
broken device drivers are no longer in widespread use, we will
delete this feature.) See ovs-vswitchd.conf.db(5) for more
information.
- OpenFlow:
- Added ability to match on IPv6 flow label through NXM.
- Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
- Added ability to match on TTL in IPv4 and IPv6 through NXM.
- Added ability to modify ECN bits in IPv4.
- Added ability to modify TTL in IPv4.
- ovs-vswitchd:
- Don't require the "normal" action to use mirrors. Traffic will
now be properly mirrored for any flows, regardless of their
actions.
- Track packet and byte statistics sent on mirrors.
- ovs-appctl:
- New "fdb/flush" command to flush bridge's MAC learning table.
- ovs-test:
- A new distributed testing tool that allows one to diagnose performance
and connectivity issues. This tool currently is not included in RH or
Xen packages.
- RHEL packaging now supports integration with Red Hat network scripts.
- Debian: Depend on python (>= 2.7) | python-argparse instead of
python-argparse to avoid pulling in python2.6
(closes: #653645)
openvswitch (1.3.0-1) unstable; urgency=low
[ Open vSwitch team ]
* New upstream version
- OpenFlow:
- Added an OpenFlow extension which allows the "output" action to accept
NXM fields.
- Added an OpenFlow extension for flexible learning.
- Bumped number of NXM registers from four to five.
- ovs-appctl:
- New "version" command to determine version of running daemon.
- If no argument is provided for "cfm/show", displays detailed
information about all interfaces with CFM enabled.
- If no argument is provided for "lacp/show", displays detailed
information about all ports with LACP enabled.
- ovs-vswitchd:
- The software switch now supports 255 OpenFlow tables, instead
of just one. By default, only table 0 is consulted, but the
new NXAST_RESUBMIT_TABLE action can look up in additional
tables. Tables 128 and above are reserved for use by the
switch itself; please use only tables 0 through 127.
- Add support for 802.1D spanning tree (STP).
- Fragment handling extensions:
- New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
fields are made available for matching in fragments with
offset 0.
- New NXM_NX_IP_FRAG match field for matching IP fragments (usable
via "ip_frag" in ovs-ofctl).
- New ovs-ofctl "get-frags" and "set-frags" commands to get and set
fragment handling policy.
- CAPWAP tunneling now supports an extension to transport a 64-key. By
default it remains compatible with the old version and other
standards-based implementations.
- Flow setups are now processed in a round-robin manner across ports
to prevent any single client from monopolizing the CPU and conducting
a denial of service attack.
- Added support for native VLAN tagging. A new "vlan_mode"
parameter can be set for "port". Possible values: "access",
"trunk", "native-tagged" and "native-untagged".
- test-openflowd has been removed. Please use ovs-vswitchd instead.
openvswitch (1.2.0-1) unstable; urgency=low
[ Open vSwitch team ]
* New upstream version
- New "ofproto" abstraction layer to ease porting to hardware
switching ASICs.
- Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
- Datapath support for Linux kernels up to 3.0.
- OpenFlow:
- New "bundle" and "bundle_load" action extensions.
- Database:
- Implement table unique constraints.
- Support cooperative locking between callers.
- ovs-dpctl:
- New "-s" option for "show" command prints packet and byte
counters for each port.
- ovs-ofctl:
- New "--readd" option for "replace-flows".
- ovs-vsctl:
- New "show" command to print an overview of configuration.
- New "comment" command to add remark that explains intentions.
- ovs-brcompatd has been rewritten to fix long-standing bugs.
- ovs-openflowd has been renamed test-openflowd and moved into the
tests directory. Its presence confused too many users. Please
use ovs-vswitchd instead.
- New ovs-benchmark utility to test flow setup performance.
- A new log level "off" has been added. Configuring a log facility
"off" prevents any messages from being logged to it. Previously,
"emer" was effectively "off" because no messages were ever logged at
level "emer". Now, errors that cause a process to exit are logged
at "emer" level.
- "configure" option --with-l26 has been renamed --with-linux, and
--with-l26-source has been renamed --with-linux-source. The old
names will be removed after the next release, so please update
your scripts.
- The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
datapath/linux-2.6/compat-2.6 directories.
- Feature removals:
- Dropped support for "tun_id_from_cookie" OpenFlow extension.
Please use the extensible match extensions instead.
- Removed the Maintenance_Point and Monitor tables in an effort
to simplify 802.1ag configuration.
- Performance and scalability improvements
- Bug fixes
openvswitch (1.1.1-1) unstable; urgency=low
[ Open vSwitch team ]
* Bug fixes.
[ Simon Horman ]
* docs: Suppress warning marcro DD not defined
(upstream commit 58f870d0)
* debian: Make openvswitch depend on Python
(upstream commit aa41cb61)
* debian: Don't begin openvswitch-pki description with article.
(upstream commit bc6bb66)
* Debian: Add ${misc:Depends} dependency to python-openvswitch
* Debian: Update standards version from 3.9.1 to 3.9.2
* Debian: ${source:Version} dependency on python openvswitch
* Debian: ${source:Version} dependency for python openvswitch
* Switch to dpkg-source 3.0 (quilt) format
- For local non-debian/ patches (above)
openvswitch (1.1.0-1) unstable; urgency=low
[ Open vSwitch team ]
* New upstream version
- Ability to define policies over IPv6
- LACP
- 802.1ag CCM
- Support for extensible match extensions to OpenFlow
- QoS:
- Support for HFSC qdisc.
- Queue used by in-band control can now be configured.
- Kernel:
- Kernel<->userspace interface has been reworked and should be
close to a stable ABI now.
- "Port group" concept has been dropped.
- GRE over IPSEC tunnels
- Bonding:
- New active backup bonding mode.
- New L4 hashing support when LACP is enabled.
- Source MAC hash now includes VLAN field also.
- miimon support.
- Greatly improved handling of large flow tables
- ovs-dpctl:
- "show" command now prints full vport configuration.
- "dump-groups" command removed since kernel support for
port groups was dropped.
- ovs-vsctl:
- New commands for working with the new Managers table.
- "list" command enhanced with new formatting options and --columns
option.
- "get" command now accepts new --id option.
- New "find" command.
- ovs-ofctl:
- New "queue-stats" command for printing queue stats.
- New commands "replace-flows" and "diff-flows".
- Commands to add and remove flows can now read from files.
- New --flow-format option to enable or disable NXM.
- New --more option to increase OpenFlow message verbosity.
- Removed "tun-cookie" command, which is no longer useful.
- ovs-controller enhancements for testing various features.
- New ovs-vlan-test command for testing for Linux kernel driver VLAN
bugs. New ovs-vlan-bug-workaround command for enabling and
disabling a workaround for these driver bugs.
- OpenFlow support:
- "Resubmit" actions now update flow statistics.
- New "register" extension for use in matching and actions, via NXM.
- New "multipath" experimental action extension.
- New support for matching multicast Ethernet frames, via NXM.
- New extension for OpenFlow vendor error codes.
- New extension to set the QoS output queue without actually
sending to an output port.
- Open vSwitch now reports a single flow table, instead of
separate hash and wildcard tables. This better models the
current implementation.
- New experimental "note" action.
- New "ofproto/trace" ovs-appctl command and associated utilities
to ease debugging complex flow tables.
- Database:
- Schema documentation now includes an entity-relationship diagram.
- The database is now garbage collected. In most tables,
unreferenced rows will be deleted automatically.
- Many tables now include statistics updated periodically by
ovs-vswitchd or ovsdb-server.
- Every table now has an "external-ids" column for use by OVS
integrators.
- There is no default controller anymore. Each bridge must have its
controller individually specified.
- The "fail-mode" is now a property of a Bridge instead of a Controller.
- New versioning and checksum features.
- New Managers table and manager_options column in Open_vSwitch table
for specifying managers. The old "managers" column in the
Open_vSwitch table has been removed.
- Many "name" columns are now immutable.
- Feature removals:
- Dropped support for XenServer pre-5.6.100.
- Dropped support for Linux pre-2.6.18.
- Dropped controller discovery support.
- Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
Statistics reporting in the database is a rough equivalent.
- Dropped the "corekeeper" package (now separate, at
http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
- Performance and scalability improvements
- Bug fixes
[ Simon Horman ]
* Add the following fixes from upstream branch-1.1
- 7f1aca9 dpif-linux: Avoid logging error on ENOENT in
dpif_linux_is_internal_device().
- 8996f83 dpif-linux: Avoid segfault on netdev_get_stats() without kernel
module.
- 002d4a3 vswitch: Improve schema documentation.
- 58bd294 cfm: Fix broken fault logic.
- c042664 bridge: Run once before configuring CFM.
* Switch to dpkg-source 3.0 (quilt) format
openvswitch (1.1.0~pre2.g2.ea763e0e-1) unstable; urgency=low
* Git snapshot, including
- tests: Fix Y2011 bug in testsuite
(closes: #609506)
openvswitch (1.1.0~pre2.g1.bbe8d06e-1) unstable; urgency=low
* Git snaptshot
openvswitch (1.1.0~pre2-5) unstable; urgency=low
* Open vSwitch only works on Linux so set
the Architecture of binary packages to linux-any accordingly
openvswitch (1.1.0~pre2-4) unstable; urgency=low
* Add procps to Build-Depends
(closes: #602891)
openvswitch (1.1.0~pre2-3) unstable; urgency=low
* Remove the corekeeper package as it isn't strongly related
to Open vSwitch. It has subsequently been broken off into
a separate source repository and may be uploaded as its
own debian source package.
http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper;a=summary
(closes: #602946)
* Avoid the use of long socket names.
(closes: #602891, closes: #602911)
openvswitch (1.1.0~pre2-2) unstable; urgency=low
* Clarify licensing of files in xenserver/
openvswitch (1.1.0~pre2-1) unstable; urgency=low
* New upstream version
- Bug fixes
openvswitch (1.1.0~pre1-1) unstable; urgency=low
* New upstream version
- OpenFlow 1.0 slicing (QoS) functionality
- Python bindings for configuration database (no write support)
- Performance and scalability improvements
- Bug fixes
openvswitch (1.0.1-1) unstable; urgency=low
* New upstream version.
-- Openstack Ubuntu Testing Bot <email address hidden> Fri, 09 Oct 2015 14:12:58 +0000
Builds
Built packages
-
openvswitch-switch-dpdk
DPDK enabled Open vSwitch switch implementation
Package files