-
console-setup (1.108ubuntu5) vivid; urgency=medium
* Reinstate checking for XKBLAYOUT being in the config file: this handles
the cases where installs done with ubiquity don't have their debconf seen
flag set for model/layout questions. If layout is already configure, lower
the corresponding question's priority to medium so we don't ask it again.
(LP: #1446231)
-- Mathieu Trudel-Lapierre <email address hidden> Tue, 21 Apr 2015 17:19:21 -0400
-
console-setup (1.108ubuntu4) vivid; urgency=medium
* Add systemd unit for console-setup. That avoids waiting for $remote_fs
during early boot. (Note: there is no need to enable it, it gets pulled
in through systemd-vconsole-setup.service) (LP: #1430280)
-- Martin Pitt <email address hidden> Wed, 11 Mar 2015 15:33:49 +0100
-
console-setup (1.108ubuntu3) vivid; urgency=medium
* Drop console-setup-freebsd; it's useless and uninstallable given that we
don't have a freebsd port.
-- Mathieu Trudel-Lapierre <email address hidden> Tue, 03 Mar 2015 10:15:31 -0500
-
console-setup (1.108ubuntu2) vivid; urgency=medium
* Fix the mess I made with the previous upload:
* Reinstate changelog entry from 1.70ubuntu10; the changes aren't necessary
as keyboard-configuration does get the translated names of keyboards.
* Reinstate changes from 1.70ubuntu11:
- Make debian/keyboard-configuration.console-setup.init do the same as the
corresponding .upstart: I. e. just call loadkeys instead of setupcon, and
don't check the current console. (Font loading is already done via udev
rules).
-- Mathieu Trudel-Lapierre <email address hidden> Mon, 02 Mar 2015 17:55:46 -0500
-
console-setup (1.108ubuntu1) vivid; urgency=medium
[ Steve Langasek ]
* Merge from Debian unstable, remaining changes: (LP: #1426721)
- Don't gzip font or ACM files in /etc/console-setup/. The space saving
is negligible, and it's more efficient not to need to uncompress them
at boot time.
- Include pc105.tree for ubiquity.
- Move boot tasks to a combination of two udev rules and a single
Upstart job, ensuring that they're run at points when we are able to
satisfy the constraints on the relevant ioctls.
- Stop running debconf-updatepo on clean.
- Set keymap and font in the initramfs if possible and sensible.
- Add an apport hook.
- Use keymapper to generate decision trees for a restricted subset of
the pc105 model.
- Depend on kbd (>= 1.15-1ubuntu3) for a valuable loadkeys improvement.
- Include support for translated keyboard names.
- Depend on debconf instead of pre-depending, because pre-depends have
no effect on config scripts.
- debian/vtrgb, debian/vtrgb.vga,
debian/console-setup-linux.setvtrgb.upstart, debian/rules,
debian/console-setup-linux.postinst: use Ubuntu's virtual terminal color
scheme by default, with a VGA color scheme available as an alternative.
- Make setupcon explicitly exit 0, so that postinsts don't fail in the
event that loadkeys can't find a console.
- Update for new layouts and variants for Montenegro and Serbia, and
migrate configuration files from the old layouts.
- Generate a locale locally for translating keyboard names in
kbdnames-maker.
- Don't copy keyboard-configuration questions to /target in OEM mode.
oem-config will ask them later, and copying these confuses it.
- Change the default font from Fixed to VGA for Lat15; while it's not
entirely complete, it looks better and is largely good enough.
- If the detect-keyboard debconf plugin is available
(cdebconf-newt-detect-keys in the installer), then offer to use it to
detect the keyboard layout.
- Fix default keyboard selection for language/country combinations
lacking a proper combined locale.
- Drop the layout/variant priority to high on fresh installs.
- Set default for Dutch to us(intl), not just us.
- Set default layout for Vietnam to 'us'.
- Set default variant for French to oss.
- Set default layout for Simplified Chinese to 'cn'.
- Don't use the default keyboard variant if the layout is overridden by
preseeding.
- If keyboard-configuration/layoutcode is preseeded but not marked as
seen, then set the default layout but don't lower the layout question
priority or preseed console-setup/ask_detect.
- Use the default keyboard model if an existing configuration file sets
XKBMODEL="".
- Go back to always asking layout before variant.
- Fix keyboard layout detection to set the layout properly.
- Reset keyboard-configuration/toggle to the default if it's set to "No
toggling" and you select a non-Latin layout.
- Automatically save the font and keymap to /etc in
/etc/init.d/console-setup if it isn't being run from init. Similarly,
ensure that the font and keymap are saved to /etc during initial
installation.
- Replace usplash detection code with Plymouth detection code.
- Load the new keyboard configuration immediately when running
'dpkg-reconfigure keyboard-configuration' in an installed system.
- Don't fail to configure keyboard-configuration if setxkbmap fails to
talk to the X display.
- Tolerate absence of setupcon in keyboard-configuration.postinst.
- Drop the simplified keyboard-configuration/xkb-keymap question.
- Fix command injection in ckbcomp.
- debian/console-setup.console-font.upstart: Add Upstart job that sets up
console font when plymouth-splash is starting.
- Override description of the ch layout from "German (Switzerland)" to
just "Switzerland".
- Map ppc64el/* to XKBMODEL=pc105.
* Dropped changes, included in Debian:
- "Do not configure keyboard; keep kernel keymap" model option,
preseedable by keyboard-configuration/modelcode=SKIP: this is now
supported upstream with either "unknown" or an empty string as the
model.
- Run kbd_mode on each tty in ACTIVE_CONSOLES rather than on the current
tty, since the current tty might belong to X and changing X's tty out
of raw mode is a very bad idea.
- Include Terminus font in the compiled packages. Do not depend, but
conflict/provide/replace console-terminus. New upstream version of
the Terminus font (4.32).
- Explicitly build-depend on liblocale-gettext-perl for kbdnames-maker,
and likewise have keyboard-configuration depend on
liblocale-gettext-perl.
- Weaken test for whether /usr is mounted; testing for /usr/share is
sufficient, and fixes operation in d-i.
- Make keyboard-configuration replace old console-setup/console-setup-mini
versions as well as conflicting with them.
- Set default layout for Kurdish to tr(ku).
* Dropped changes, no longer needed:
- Cope with systems installed with console-setup-udeb (<< 1.53) (which
predates Ubuntu 12.04 and Debian wheezy).
- Drop ancient handling of an empty codeset in the config file.
- Drop vtrgb upgrade handling from natty
- Drop upstart job transition from lucid
* setupcon: Map XKBMODEL=SKIP to '' for compatibility with existing
configs.
* debian/rules: revert hard-coding of a list of "debconf-selectable"
layouts for the udebs, since we don't use this debconf question in Ubuntu
and all layouts are selectable.
* setupcon: revert ridiculous upstream twiddling of keymap cache filenames:
- the variables are taken from a config file which, if changed,
invalidates the cache.
- there is only ever one keyboard map per system.
- the system should not have to resolve filenames to find the keymap cache
on boot.
* Move vtrgb handling to console-setup-linux package, since this is clearly
Linux-specific.
* Add missing console-setup-linux.prerm to remove /etc/vtrgb alternatives
* Keyboard/kbdcompiler: fix bug in filtering of unsupported variants that
breaks generation of the pc105.tree for d-i keyboard detection.
* debian/keyboard-configuration.postinst: udpkg is not part of an installed
Debian system; don't fail to configure if it's absent and the script is
called outside of an installer context.
* Don't make debian/copyright a symlink to COPYRIGHT, this is disallowed
by the Ubuntu archive installer.
[ Mathieu Trudel-Lapierre ]
* debian/keyboard-configuration.config: fix typo in model check for SKIP;
even when looking up the layout/variant, we need to check for the model
as XKBMODEL, since $model doesn't exist.
* debian/preprocessor: revert the removal of keyboard names (for size) of
console-setup-udeb: we do need those, since we don't use the simplified
xkb-keymap template from Debian just yet: this way we can still show
country/language names when selecting a keyboard, layout or variant.
-- Mathieu Trudel-Lapierre <email address hidden> Fri, 27 Feb 2015 16:36:52 -0500
-
console-setup (1.70ubuntu11) vivid; urgency=medium
* Make debian/keyboard-configuration.console-setup.init do the same as the
corresponding .upstart: I. e. just call loadkeys instead of setupcon, and
don't check the current console. (Font loading is already done via udev
rules). (LP: #1400393)
-- Martin Pitt <email address hidden> Wed, 17 Dec 2014 07:55:34 +0100
-
console-setup (1.70ubuntu10) vivid; urgency=medium
* Add all language-packs as build dependencies, to get translated names
of keyboard names in the DEBIAN/config of keyboard-setup package.
-- Dimitri John Ledkov <email address hidden> Sun, 30 Nov 2014 22:21:38 +0000
-
console-setup (1.70ubuntu9) utopic; urgency=high
* No change rebuild against new dh_installinit, to call update-rc.d at
postinst.
-- Dimitri John Ledkov <email address hidden> Wed, 28 May 2014 10:39:17 +0100