-
debhelper (7.0.13ubuntu1~hardy1) hardy-backports; urgency=low
* Automated backport upload; no source changes.
debhelper (7.0.13ubuntu1) intrepid; urgency=low
* Merge from Debian unstable, remaining changes:
- autoscripts/postinst-scrollkeeper: Do not show scrollkeeper-update
output.
- dh_installudev: Use priority 50 by default (instead of z60) and '-'
separator (instead of '_').
- dh_installxfonts: Use versioned dependency for xfonts-utils. This should
be kept until dapper goes out of support, to avoid broken dapper
backports.
debhelper (7.0.13) unstable; urgency=low
* dh_auto_install: Rather than looking at the number of binary packages
being acted on, look at the total number of binary packages in the
source package when deciding whether to install to debian/package or
debian/tmp. This avoids inconsistencies when building mixed arch all+any
packages using the binary-indep and binary-arch targets.
Closes: #487938
debhelper (7.0.12) unstable; urgency=medium
* Correct docs about dh_install and debian/tmp in v7 mode. It first looks in
the current directory, or whatever is configured with --srcdir. Then it
always falls back to looking in debian/tmp.
* Medium urgency to get this doc fix into testing.
debhelper (7.0.11ubuntu1) intrepid; urgency=low
* Merge with Debian unstable. Remaining Ubuntu changes:
- autoscripts/postinst-scrollkeeper: Do not show scrollkeeper-update
output.
- dh_installudev: Use priority 50 by default (instead of z60) and '-'
separator (instead of '_').
- dh_installxfonts: Use versioned dependency for xfonts-utils. This should
be kept until dapper goes out of support, to avoid broken dapper
backports.
debhelper (7.0.11) unstable; urgency=low
* dh: Man page fix. Closes: #485116
* Add stamp files to example rules targets. Closes: #486327
* Add a build dependency on file. The rules file now runs dh_strip and
dh_shlibdeps, which both use it. (It could be changed not to, but
it's good to have it run all the commands as a test.) Closes: #486439
* Typo fix. Closes: #486464
debhelper (7.0.10) unstable; urgency=low
* dh_compress: Do not compress index.sgml files, as generated by gtk-doc.
Closes: #484772
debhelper (7.0.9) unstable; urgency=low
* rules.tiny: Typo fix. Closes: #479647
* dh_installinit: Add --restart-after-upgrade, which avoids stopping a
daemon in the prerm, and instead restarts it in the postinst, keeping
its downtime minimal. Since some daemons could break if files are upgraded
while they're running, it's not the default. It might become the default
in a future (v8) compatibility level. Closes: #471060
* dh: fix POD error. Closes: #480191
* dh: Typo fixes. Closes: #480200
* dh: Add remove_command to the sequence interface.
* dh_auto_clean: setup.py clean can create pyc files. Remove. Closes: #481899
debhelper (7.0.8) unstable; urgency=low
* dh: Add an interface that third-party packages providing debhelper commands
can use to insert them into a command sequence.
(See dh(1), "SEQUENCE ADDONS".)
* dh: --with=foo can be used to include such third-party commands.
So, for example, --with=cli could add the dh_cli* commands from
cli-common.
* Moved python-support special case out of dh and into a python-support
sequence addon. --with=python-support is enabled by default to avoid
breaking backwards compatability.
debhelper (7.0.7) unstable; urgency=low
* dh_installxfonts: Fix precidence problem that exposes a new warning
message in perl 5.10.
debhelper (7.0.6) unstable; urgency=low
* dh_auto_test: Correct Module::Build tests.
debhelper (7.0.5) unstable; urgency=low
* Convert copyright file to new format.
* dh_test*: inhibit logging. Closes: #478958
debhelper (7.0.4) unstable; urgency=low
* Fix underescaped $ in Makefile. Closes: #478475
* dh_auto_test: Run tests for Module::Build packages. (Florian Ragwitz)
debhelper (7.0.3) unstable; urgency=low
* dh: Fix man page typos. Closes: #477933
* Add missing $! to error message when the log can't be opened.
* One problem with the log files is that if dh_clean is not the last command
run, they will be left behind. This is a particular problem on build
daemons that use real root. Especially if cdbs is used, since it runs
dh_listpackages after clean, thereby leaving behind log files that
only root can touch. Avoid this particular special case by inhibiting
logging by dh_listpackages.
debhelper (7.0.2) unstable; urgency=low
* dh: Optimise the case where the binary-arch or binary-indep sequence is
run and there are no packages of that type.
* dh_auto_configure: Set PERL_MM_USE_DEFAULT when configuring MakeMaker
packages to avoid interactive prompts.
* dh_auto_*: Also support packages using Module::Build.
* dh_auto_*: Fix some calls to setup.py. Now tested and working with
python packages.
* dh_install: Find all possible cases of "changelog" and "changes", rather
than just looking for some predefined common cases.
debhelper (7.0.1) unstable; urgency=low
* I lied, one more v7 change slipped in..
* dh_installchangelogs: In v7 mode, if no upstream changelog is specified,
and the package is not native, guess at a few common changelog filenames.
debhelper (7.0.0) unstable; urgency=low
* dh: New program that runs a series of debhelper commands in a sequence.
This can be used to construct very short rules files (as short as 3
lines), while still exposing the full power of debhelper when it's
needed.
* dh_auto_configure: New program, automates running ./configure,
Makefile.PL, and python distutils. Calls them with exactly the same
options as cdbs does by default, and allows adding/overriding options.
* dh_auto_build: New program, automates building the package by either
running make or using setup.py. (Support for cmake and other build systems
planned but not yet implemented.)
* dh_auto_test: New program, automates running make test or make check
if the Makefile has such a target.
* dh_auto_clean: New program, automates running make clean (or distclean,
or realclean), or using setup.py to clean up.
* dh_auto_install: New program, automates running make install, or using
setup.py to install. Supports the PREFIX=/usr special case needed by
MakeMaker Makefiles. (Support for cmake and other build systems planned
but not yet implemented.)
* New v7 mode, which only has three changes from v6, and is the new
recommended default, especially when using dh.
* dh_install: In v7 mode, if --sourcedir is not specified, first look for
files in debian/tmp, and then will look in the current directory. This
allows dh_install to interoperate with dh_auto_install without needing any
special parameters.
* dh_clean: In v7 mode, read debian/clean and delete all files listed
therein.
* dh_clean: In v7 mode, automatically delete *-stamp files.
* Add a Makefile and simplify this package's own rules file using
all the new toys.
* dh_clean: Don't delete core dumps. (Too DWIM, and "core" is not
necessarily a core dump.) Closes: #477391
* dh_prep: New program, does the same as dh_clean -k (which will be
deprecated later).
debhelper (6.0.12) unstable; urgency=low
* dh_icons: Support .xpm format icons. Stop looking for .jpg icons, and
also, for completeness, support .icon files. This matches the set of
extensions supported by gtk-update-icon-cache. Closes: #448094
debhelper (6.0.11) unstable; urgency=medium
* dh_installman: man --recode transparently uncompresses compressed
pages. So when saving the output back, save it to a non-compressed
filename (and delete the original, compressed file). Closes: #470913
debhelper (6.0.10) unstable; urgency=low
* dh_perl: Remove empty directories created by MakeMaker.
debhelper (6.0.9) unstable; urgency=low
* dh_installman: Don't recode symlinks. Closes: #471196
debhelper (6.0.8) unstable; urgency=low
* dh_installman: Convert all man pages in the build directory to utf-8, not
just those installed by the program.
debhelper (6.0.7) unstable; urgency=low
* dh_lintian: Finally added this since linda is gone and there's only
lintian to worry about supporting. Closes: #109642, #166320, #206765
(Thanks to Steve M. Robbins for the initial implementation.)
debhelper (6.0.6) unstable; urgency=low
* dh_compress: Pass -n to gzip to yeild more reproducible file contents.
The time stamp information need not be contained in the .gz file since the
time stamp is preserved when compressing and decompressing. Closes: #467100
* The order of dependencies generated by debhelper has been completly random
(hash key order), so sort it. Closes: #468959
debhelper (6.0.5) unstable; urgency=low
* dh_installman: Recode all man pages to utf-8 on installation.
Closes: #462937 (Colin Watson)
* Depend on a new enough version of man-db.
-- Michael Casadevall <email address hidden> Mon, 10 Nov 2008 13:04:27 +0000
-
debhelper (6.0.4ubuntu1) hardy; urgency=low
* Merge with Debian unstable (LP: #184545). Remaining changes:
- autoscripts/postinst-scrollkeeper: Do not show scrollkeeper-update
output.
- dh_installudev: Use priority 50 by default (instead of z60) and '-'
separator (instead of '_').
- dh_installxfonts: Use versioned dependency for xfonts-utils. This should
be kept until dapper goes out of support, to avoid broken dapper
backports.
- dh_python: Add 2.5 as supported Python version. dh_python is generally
deprecated in favor of dh_py{central,support}, but universe might still
have some unconverted packages. This should be dropped at some point,
though.
debhelper (6.0.4) unstable; urgency=low
* dh_strip: Improve the idempotency fix put in for #380314.
* dh_strip: The -k flag didn't work (--keep did). Fix.
* dh_shlibdeps: Add emul to exclude list.
debhelper (6.0.3) unstable; urgency=low
* dh_link: -X can be used to avoid it modifying symlinks to be compliant
with policy. Closes: #461392
* dh_shlibdeps: Rather than skipping everything in /usr/lib/debug,
which can include debug libraries that dpkg-shlibdeps should look at,
only skip the subdirectories of it that contain separate debugging
symbols. (Hardcoding the names of those directories is not the best
implementation, but it will do for now.) Closes: #461339
debhelper (6.0.2) unstable; urgency=low
* Revert slightly broken refactoring of some exclude code.
Closes: #460340, #460351
debhelper (6.0.1) unstable; urgency=low
* dh_installdocs/examples: Don't unnecessarily use the exclude code path.
* dh_install{,docs,examples}: Avoid infinite recursion when told to
install a directory ending with "/." (slashdot effect?) when exclusion is
enabled. Emulate the behavior of cp in this case. Closes: #253234
* dh_install: Fix #459426 here too.
debhelper (6.0.0) unstable; urgency=low
* dh_gencontrol: Stop passing -isp, it's the default now. Closes: #458114
* dh_shlibdeps: Update documentation for -L and -l. dpkg-shlibdeps is now
much smarter, and these options are almost never needed. Closes: #459226
* dh_shlibdeps: If a relative path is specified in -l, don't prepend the pwd
to it, instead just prepend a slash to make it absolute. dpkg-shlibdeps
has changed how it used LD_LIBRARY_PATH, so making it point into the
package build directory won't work.
* dh_shlibdeps: Change "-L pkg" to cause "-Sdebian/pkg" to be passed to
dpkg-shlibdeps. The old behavior of passing -L to dpkg-shlibdeps didn't
affect where it looked for symbols files. Closes: #459224
* Depend on dpkg-dev 1.14.15, the first to support dpkg-shlibdeps -S.
* dh_installdocs, dh_installexamples: Support files with spaces in exclude
mode. Closes: #459426
* debhelper v6 mode is finalised and is the new recommended compatibility
level.
debhelper (5.0.63) unstable; urgency=low
* dh_installdocs: Tighten doc-base document id parsing to only accept
the characters that the doc-base manual allows in the id. Closes: #445541
-- Michael Bienia <email address hidden> Sat, 26 Jan 2008 14:14:22 +0100
-
debhelper (5.0.62ubuntu1) hardy; urgency=low
* Merge with Debian unstable. See 5.0.58ubuntu1 for remaining diffs
(unchanged).
debhelper (5.0.62) unstable; urgency=low
* Remove execute bit from desktop files in /usr/share/applications.
Closes: #452337
* Fix man page names of translated debhelper(7) man pages.
Patch from Frédéric Bothamy. Closes: 453051
* dh_makeshlibs: Use new -I flag to specify symbol files, necessary to
properly support includes. Closes: #452717
* Increase dpkg-dev dependency to 1.14.12 to ensure that dh_makeshlibs
isn't used with an old dpkg-gensymbols that doesn't support -I.
-- Matthias Klose <email address hidden> Wed, 12 Dec 2007 16:32:43 +0000
-
debhelper (5.0.61ubuntu1) hardy; urgency=low
* Merge with Debian unstable. See 5.0.58ubuntu1 for remaining diffs
(unchanged).
debhelper (5.0.61) unstable; urgency=low
* Man page fix re v4. Closes: #450608
* dh_makeshlibs: Support symbols files. Closes: #443978
Packages using this support should build-depend on dpkg-dev (>= 1.14.8).
Symbols files can be downloaded from mole:
http://qa.debian.org/cgi-bin/mole/seedsymbols
debhelper (5.0.60) unstable; urgency=low
* Debhelper is now developed in a git repository.
* Reword paragraph about debian/compress files to perhaps be more clear
about the debian/compress file. Closes: #448759
* dh_installdirs(1): Remove unnecessary caveat about slashes.
* dh_icons: Now that GTK 2.12 has entered testing, use the much simpler to
call update-icon-caches command. Thanks, Josselin Mouette.
-- Martin Pitt <email address hidden> Fri, 23 Nov 2007 14:57:45 +0100
-
debhelper (5.0.59ubuntu1) hardy; urgency=low
* Merge trigger support from Debian unstable.
debhelper (5.0.59) unstable; urgency=low
* dh_installdeb: Add support for dpkg triggers, by installing
debian/package.triggers files.
-- Martin Pitt <email address hidden> Tue, 23 Oct 2007 16:56:09 +0200
-
debhelper (5.0.58ubuntu1) hardy; urgency=low
* Merge with Debian unstable. Remaining changes:
- autoscripts/postinst-scrollkeeper: Do not show scrollkeeper-update
output.
- dh_installudev: Use priority 50 by default (instead of z60) and '-'
separator (instead of '_').
- dh_installxfonts: Use versioned dependency for xfonts-utils. This should
be kept until dapper goes out of support, to avoid broken dapper
backports.
- dh_python: Add 2.5 as supported Python version. dh_python is generally
deprecated in favor of dh_py{central,support}, but universe might still
have some unconverted packages. This should be dropped at some point,
though.
debhelper (5.0.58) unstable; urgency=low
* dh_clean: append "/" to the temp dir name to avoid removing
a file with the same name. Closes: #445638
debhelper (5.0.57) unstable; urgency=low
* Add --ignore option. This is intended to ease dealing with upstream
tarballs that contain debian directories, by allowing debhelper config
files in those directories to be ignored, since there's generally no
good way to delete them out of the upstream tarball, and they can easily
get in the way if upstream is using debian/ differently than the Debian
maintainer.
debhelper (5.0.56) unstable; urgency=low
* dh_installmodules: Since modutils is gone, stop supporting
debian/*.modutils files. Warn about such files. Closes: #443127
debhelper (5.0.55) unstable; urgency=low
* dh_desktop: Only generate calls to update-desktop-database for desktop
files with MimeType fields. Patch from Emmet Hikory. Closes: #427831
* dh_strip: Don't run objcopy if the output file already exists.
Closes: #380314
* dh_strip: Check that --dbg-package lists the name of a real package.
Closes: #442480
debhelper (5.0.54) unstable; urgency=low
* dh_strip: Man page reference to policy section on DEB_BUILD_OPTIONS.
Closes: #437337
* dh_link: Skip self-links. Closes: #438572
* Don't use - in front of make clean in example rules files.
* Typo. Closes: #441272
debhelper (5.0.53) unstable; urgency=low
* dh_icons: Check for index.theme files before updating the cache.
Closes: #432824
debhelper (5.0.52) unstable; urgency=low
* Remove DOS line endings from dh_icons scriptlets. Thanks, Daniel Holbach.
Closes: #432321
-- Martin Pitt <email address hidden> Mon, 22 Oct 2007 12:23:42 +0200
-
debhelper (5.0.51ubuntu3) gutsy; urgency=low
* autoscripts/postinst-iconcache, autoscripts/postrm-iconcache:
run gtk-update-icon-cache <args> || true to not bomb out in postinsts.
-- Daniel Holbach <email address hidden> Thu, 12 Jul 2007 09:26:39 +0100
