flash-kernel (3.90ubuntu1) bionic; urgency=medium
[ Balint Reczey ]
* Merge with Debian (LP: #1743771)
- remaining changes:
- add "quiet splash" as default options to omap bootscr
- re-add support for the FLASH_KERNEL_SKIP env variable, so the image
build infrastructure has a chance to skip the automated flash-kernel
run during image builds.
- bootscr.highbank: allow more space to load larger kernels
- Add support for Calxeda Highbank (with bootscr.highbank different from
Debian's version)
- Re-add support for Marvell ArmadaXP
- Fix armadaxp kernel load address
- use umount -l in the cleanup function, else we fail while finishing up
with the script
- add DB entry for "OMAP3 Beagle Board" (funnily thats missing)
- add Panda to the list of supported board in the README file
- debian/control: Re-add omap and omap4 to the flash-kernel-installer
XB-Subarchitecture field. These appear to have been lost somewhere
along the way.
- Also add omap and omap4 to flash-kernel-installer.isinstallable.
- add a diversion for update-initramfs to live-installers
post-base-installer.d to avoid update-initramfs runs before
flash-kernel is configured
- add a check for the diverted update-initramfs to
flash-kernel-installer, so it gets reverted before we try to call
update-initramfs
- make post-base-installer.d/01flash-kernel-diversion actually an
executable shell script
- switch omap3 and omap4 to uEnv.txt/preEnv.txt (the former holds all
active boot commands, the latter holds the kernel commandline only)
- enable UUID detection of the currently used root device
- if uEnv.txt is defined in the db for an arch, generate preEnv.txt from
UBOOT_DEFAULTS and UUID detection data
- switch omap3 and omap4 from Bootloader-sets-root: no to yes, we now
generate a root=UUID= line on the fly for arches using
uEnv.txt/preEnv.txt
- introduce bootscript/uEnvtxt.omap
- do not move the original uEnvtxt.omap to the target, use a copy instead
- initramfs-tools/hooks/flash_kernel_set_root:
- make sure that if we dont want to override the bootloader root=
option by setting "Bootloader-sets-root: yes", we actually dont do it
- Also check for FLASH_KERNEL_SKIP to avoid setting up the root
parameter in case flash-kernel will not be used
- this is a slightly different approach to fix the bug than
the patch attached to the bug.
- hide the boot device from udisk's automounting after installation
on all systems using uEnv.txt to configure u-boot
- make sure we only rename the bootrom partition so udisks hides it,
when using mkdosfs for setting the label like we did in jasper (where
we cached the contents before doing this) MLO and u-boot.bin are gone
- make sure that /dev is bind mounted in /target when running
update-initramfs from flash-kernel-installer, else we do not find the
boot media (this is only a workaround, actual fixing of
the netinst environment is needed to fix this properly)
- add support for the grouper architecture
- make sure blkid only gives us the UUID and not any other metadata like
labels or filesystem
- drop the "|| true" from the initramfs building code, if we fail here we
actually dont want to attempt to flash that
- Do not run flash-kernel inside an LXC container
- Accept "generic" as a valid kernel flavor on highbank
- Add support for Calxeda ECX-2000 to the machine DB
- Add generic-lpae to the XB-Subarchitecture list in debian/control
- Update the Highbank entry in DB to use its device-tree model name
- Fix the testsuite to work with the new DT model support and add
a new test to specifically try to use a DT instead of cpuinfo.
- And now fix the quoting error exposed by the fixed testsuite.
- debian/flash-kernel-installer.isinstallable: add arm*/generic-lpae
- Fix typo in dtb_kver test that made it break all non-dtb platforms.
- Add support for EXYNOS5440-based platforms
- Added support for HP ProLiant m800 Server Cartridge
- Filter the selection of 'latest' usable kernel through the
whitelist.
- Do not fail if there are no specified Kernel-Flavors for this machine.
- HP Moonshot Cartridges: Use $baudrate from u-boot environment as
serial console speed
- HP Moonshot Cartridges: Enable hardware flow control as required by
the HP moonshot chassis
- Enable U-Boot environment support for X-Gene platforms
- Use filesystem agnostic "load" command instead of assuming ext4
- Add support for HP ProLiant m800 cartridges
- Set required boot arguments for HP ProLiant m800 cartridges
- Allow us to find DTBs in both the old flat layout and the new vendor
subdirectory layout, so we keep backward compatibility
- Wandboard: Use /dev/disk/by-path/platform-2198000.usdhc-part1
instead of the hardcoded mmcblk1p1, this should make things work on
boards with just a single microSD card in.
- make the package postinst respect FLASH_KERNEL_SKIP
- Call systemd-detect-virt instead of the Ubuntu specific
running-in-container wrapper.
- Extend support for the RPi2 to actually install the kernel/initramfs
on the fat partition, and provide a uboot boot script based on the one
used for Snappy images.
- Extend functions to support generating uboot.env images, as an
alternative to boot.scr and uEnv.txt, and use this for RPi2 as well.
- Adjust the uboot.env.rpi2 to use the one Paolo Pisati has tested,
instead of trying to base on the Snappy one, which is failing to boot.
- Adjust the size of uboot.env based on empirical results on the rpi2.
- dropped changes, merged in Debian:
- make sure the call to abootimg -i does not make the script fail
(checking non bootimg devices makes it return 1 even though there
is no error, this in turn makes teh whole script fail since we run
with "set -e")
- determine the latest installer kernel version in the target rootfs
instead of assuming the version is the same as the running kernel
- flash-plugin-installer: make installable on armhf/generic for highbank
- Also update XB-Subarchitecture to use "generic" instead of 'highbank"
- Extending Android specific options to cover the Ubuntu Touch use cases
(flashing to a specific device and support skipping initrd)
- Enabling support for mako (Nexus 4)
- Fix get_kfile_suffix() function to deal with flavours with dashes.
- Apply patch from Paolo Pisati for appended DTB support
- Add basic support for WandBoard Quad.
- flash-kernel-installer: make installable on armhf/exynos5
- Add support for APM X-Gene
- Add support for installing dtb files in boot partition; activate this
for APM X-Gene boards
- Add support for HP ProLiant m400 Server Cartridges
- Update APM X-Gene config to match upstream device tree filename/model
- Add a bootscript specific to X-Gene Mustang boards since they need to
pull their dtb from the OS.
- db/all.db: add dummy entries as noops when running on VMs
- Add U-Boot environment configuration support
- Cherry pick from Debian: Succeed but do nothing when run on an
unknown machine which was booted via EFI.
- Add support for the Raspberry Pi2; thanks to Paolo Pisati
- Cherry-pick fixes from Debian to support copying kernel/initrd to
destination.
- Add Raspberry Pi 3 support
- Add support for gzip-compressed kernel images
- Adjust rpi2/3 dtb address from 0x100 to 0x02000000
- Add support for QCT APQ8064 CDP; thanks Alfonso Sanchez-Beato.
- Check /proc/device-tree/model before /proc/cpuinfo
- dropped obsoleted changes:
- add very very ugly temporary workaround to make quantal A3 arm server
installs possible (yes, i suck)
- re-add a diversion for update-initramfs to live-installers
post-base-installer.d to avoid update-initramfs runs before
flash-kernel is configured
- re-add a check for the diverted update-initramfs to
flash-kernel-installer, so it gets reverted before we try to call
update-initramfs
- drop teh super ugly hack that added a /var/lib/flash-kernel/configured
file to actually check if flash-kernel is configured
- sigh, not only drop the creation of /var/lib/flash-kernel/configured
but also the check for its existance, else we will always exit 0
- make post-base-installer.d/01flash-kernel-diversion executable
- flash-kernel-installer.postinst: now that we have a diversion in place
there isnt a pre-existing initrd, instead of calling
update-initramfs -u we better call update-initramfs -c -k all to create
one from scratch
- seemingly -k all doesnt want to work with -c, use -k $(uname -r) for
now
- enable generation of a /etc/default/flash-kernel file from
flash-kernel-installer holding a UBOOT_DEFAULTS variable with distro
default settings (ro quiet splash)
- make /etc/default/flash-kernel a proper conffile
- Added support for user defined uboot environment variables
* Update tests with new fields: Android-Skip-Initrd, Bootloader-sets-root,
DTB-Kernel-Version
* Migrate default /etc/default/flash-kernel content to new default without asking via debconf
* Look for dtbs in /lib/firmware/$kvers/device-tree/ in find_dtb_file()
[ Alex McWhirter ]
* Support Raspberry Pi 2 Model B Rev 1.2
flash-kernel (3.90) unstable; urgency=medium
[ Andreas Henriksson ]
* Make ubootenv.d work on Wandboard (Closes: #884375).
* Warn when ubootenv.d snippet will be ignored (Closes: #884376).
[ Vagrant Cascadian ]
* Add option to allow "any" in Kernel-Flavors (Closes: #883547).
[ Ian Campbell ]
* Fix local shadow of $dtb_name in handle_dtb (Closes: #870430).
* Reduce scope of $dtb in handle_dtb.
[ Christian Perrier ]
* Remove Loic, Hector and Ian from Uploaders. Thanks for your work
* Add Vagrant and Karsten in Uploaders.
flash-kernel (3.89) unstable; urgency=medium
* Team upload.
[ Karsten Merker ]
* Applied a patch from Sunil Mohan Adapa <email address hidden> supporting
the installation of 32bit kernels on the Raspberry Pi 3.
(Closes: #886225).
flash-kernel (3.88) unstable; urgency=medium
[ Updated translations ]
* Lithuanian (lt.po) by Rimas Kudelis
* Norwegian Nynorsk (nn.po) by Allan Nordhøy
flash-kernel (3.87) unstable; urgency=medium
* Team upload.
[ Karsten Merker ]
* Apply a patch from Heinrich Schuchardt <email address hidden> adding
machine db entries for
- Marvell Armada 8040 DB board
- Marvell 8040 MACHIATOBin
(Closes: #878570).
flash-kernel (3.86) unstable; urgency=medium
[ Vagrant Cascadian ]
* Add entry for SolidRun HummingBoard Solo/DualLite.
flash-kernel (3.85) unstable; urgency=medium
* Team upload.
[ Ian Campbell ]
* Correct typo, FK_PROC_DRMODEL should be FK_PROC_DTMODEL.
[ Karsten Merker ]
* Add machine db entries for two sunxi-based systems that are (at
least partially) supported in kernel 4.13 and u-boot v2017.09:
- FriendlyArm NanoPi M1 Plus
- Olimex A20-OLinuXino-LIME2-eMMC
flash-kernel (3.84) unstable; urgency=medium
[ James Valleroy ]
* Add a machine db entry for the Raspberry Pi 3 Model B
(Closes: #869488).
[ Vagrant Cascadian ]
* Add a machine db entry for the Firefly-RK3399.
flash-kernel (3.83) unstable; urgency=medium
[ Karsten Merker ]
* Applied a patch from Eva Ramon <email address hidden> adding
a machine db entry for the Radxa Rock 2 Square (Closes: #868166).
flash-kernel (3.82) unstable; urgency=medium
[ Karsten Merker ]
* Add machine db entries for various sunxi-based systems that are (at
least partially) supported in kernel 4.12 and u-boot v2017.07-rc3:
- Banana Pi BPI-M2-Plus
- FriendlyArm NanoPi M1
- FriendlyARM NanoPi NEO Air
- Lichee Pi Zero
- NextThing C.H.I.P. Pro
- Xunlong Orange Pi Zero
flash-kernel (3.81) unstable; urgency=medium
[ Karsten Merker ]
* Applied a patch from Matthias Fritzsche <email address hidden> adding
a machine db entry for the BeagleBone Green (Closes: #866822).
flash-kernel (3.80) unstable; urgency=medium
[ Updated translations ]
* Simplified Chinese (zh_CN.po) by Yangfl
flash-kernel (3.79) unstable; urgency=medium
[ Roger Shimizu ]
* Update db entry of Buffalo Linkstation LiveV3 (LS-CHL),
because DTS is supported since debian kernel 4.9.10-1.
flash-kernel (3.78) unstable; urgency=medium
[ Vagrant Cascadian ]
* Update Orange Pi Plus db entry to also support "Xunlong Orange Pi Plus
/ Plus 2" which is used in recent kernel versions.
flash-kernel (3.77) unstable; urgency=medium
[ Martin Michlmayr ]
* Add machine db entry for NETGEAR ReadyNAS Duo v2. Thanks to Scott
Barker (Closes: #855960)
* Add machine db entry for Hardkernel ODROID-C2. Thanks Heinrich
Schuchardt (Closes: #845818).
flash-kernel (3.76) unstable; urgency=medium
[ Marc Kleine-Budde ]
* Add machine db entry for TI OMAP4 PandaBoard-ES (Closes: #857205).
flash-kernel (3.75) unstable; urgency=medium
[ Vagrant Cascadian ]
* Add machine db entry for Pine64+.
flash-kernel (3.74) unstable; urgency=medium
[ Martin Michlmayr ]
* Add machine db entry for Marvell ESPRESSOBin.
* Only create DTB boot file on kernels that require DTB (Closes:
#789886)
* Improve error message when DTB is missing by showing the search
path for DTB (Closes: #836679)
[ Heinrich Schuchardt ]
* Call mkimage with correct architecture (Closes: #845779)
flash-kernel (3.73) unstable; urgency=medium
[ Martin Michlmayr ]
* Restore support for DTBs with absolute paths.
[ Uwe Kleine-König ]
* Add machine db entry for Netgear ReadyNAS 104 (Closes: #806926)
flash-kernel (3.72) unstable; urgency=medium
* Team upload.
[ Karsten Merker ]
* Add machine db entries for various sunxi-based systems that are
(at least partially) supported in kernel 4.9 and u-boot v2016.11:
- Empire Electronix M712 tablet
- FriendlyARM NanoPi NEO
- INet-D978 Rev 02
- iNet Q972 tablet
- Xunlong Orange Pi Lite
- Xunlong Orange Pi PC Plus
- Xunlong Orange Pi Plus 2E
flash-kernel (3.71) unstable; urgency=medium
[ Vagrant Cascadian ]
* Add machine db entry for USB armory board.
* Update Cubieboard4 machine db entry to generate a boot script(in
addition to legacy uImage/uInitrd), as Cubieboard4 is now supported in
mainline u-boot.
flash-kernel (3.70) unstable; urgency=medium
[ Karsten Merker ]
* Add machine db entries for various sunxi-based systems that are
(at least partially) supported in kernel 4.8 and u-boot v2016.09:
- Allwinner R16 EVB (Parrot)
- INet-86DZ Rev 01
- Polaroid MID2407PXE03 tablet
* Add a machine db entry for the Olimex A33-OLinuXino (supported
in u-boot v2016.09 and in linux-next-20160923).
flash-kernel (3.69) unstable; urgency=medium
[ Vagrant Cascadian ]
* Add support for root device being set using PARTUUID.
flash-kernel (3.68) unstable; urgency=medium
[ Karsten Merker ]
* Add machine db entries for various sunxi-based systems that are
(at least partially) supported in kernel 4.7 and u-boot v2016.07:
- Colorfly E708 Q1 tablet
- Difrnce DIT4350
- Dserve DSRV9703C
- Polaroid MID2809PXE04 tablet
- Xunlong Orange Pi One
- Xunlong Orange Pi PC
- Xunlong Orange Pi 2
* Fix the DTB-ID for generic Allwinner-A13-based Q8-form-factor tablets.
[ Martin Michlmayr ]
* Handle DTBs in vendor subdirectories (as found on arm64 kernels).
* Add uboot-generic boot script for arm64: based on the armhf version
but with booti.
* Produce an error when the DTB cannot be found. (Closes: #833097)
* Add a machine db entry for NVIDIA Jetson TX1 Developer Kit.
* Add a machine db entry for DragonBoard 410c.
* Fix typos in README.
flash-kernel (3.67) unstable; urgency=medium
[ Vagrant Cascadian ]
* Add a machine db entry and boot script for Odroid-U3.
flash-kernel (3.66) unstable; urgency=medium
[ Karsten Merker ]
* Add machine db entries for various sunxi-based systems that are
(at least partially) supported in kernel 4.6 and u-boot v2016.05:
- Allwinner A83T H8Homlet Proto Dev Board v2.0
- Cubietech Cubietruck Plus
- ICnova-A20 SWAC
- iNet-9F Rev 03
- Itead Ibox A20
- Sinlinx SinA31s Development Board
- A10s-Wobo i5
- Yones TopTech BS1078 v2 Tablet
flash-kernel (3.65) unstable; urgency=medium
[ Vagrant Cascadian ]
* Add a machine db entry for Odroid XU4.
flash-kernel (3.64) unstable; urgency=medium
[ Roger Shimizu ]
* Fix script issue specific on a few linkstation devices.
flash-kernel (3.63) unstable; urgency=medium
[ Roger Shimizu ]
* Update machine db entry for "Buffalo/Revogear Kurobox Pro" to add DTB
support from kernel 4.5.1
flash-kernel (3.62) unstable; urgency=medium
[ Roger Shimizu ]
* Add <kvers> param to scripts under dtb-probe.
* Fix a few cases prevent script "dtb-probe/kirkwood-linkstation" from
running properly.
[ Vagrant Cascadian ]
* Add a machine db entry for Raspberry Pi 2 Model B.
flash-kernel (3.61) unstable; urgency=medium
[ Roger Shimizu ]
* Add myself to debian/copyright
* Add script dtb-probe/kirkwood-linkstation, based on
dtb-probe/kirkwood-qnap, to support smooth upgrade/downgrade of kernel,
since there's a split/rename for device tree file of a few Buffalo
Linkstation devices.
* Make use of above script to determine DTB file for listed devices:
- Buffalo Linkstation LS-VL
- Buffalo Linkstation LS-WSXL
- Buffalo Linkstation LS-WVL
- Buffalo Linkstation LS-WVL/VL
- Buffalo Linkstation LS-WXL
- Buffalo Linkstation LS-WXL/WSXL
* Update "DTB-Append-From" field for "Buffalo Linkstation Pro/Live",
since the patch of device tree is backported to sid (4.4) kernel.
* Update machine ID for "Buffalo Linkstation Mini (LS-WSGL)"
flash-kernel (3.60) unstable; urgency=medium
[ Karsten Merker ]
* Add machine db entries for various sunxi-based systems
- Allwinner GT90H Quad Core Tablet (v4)
- Auxtek t003 A10s hdmi tv-stick
- Empire Electronix D709 tablet
- iNet-1
- INet-98V Rev 02
- NextThing C.H.I.P.
- Point of View Protab2-IPS9
- Q8 A13 Tablet
- Q8 A23 Tablet
- Q8 A33 Tablet
- Sinovoip BPI-M2
- Wits Pro A20 DKT
- Xunlong Orange Pi Plus
flash-kernel (3.59) unstable; urgency=medium
[ Uwe Kleine-König ]
* use nandwrite when writing to nand flash. (Closes: #813995)
[ Martin Michlmayr ]
* Require --force when invoked by hand with a specific version which is not
the latest. (Closes: 807708)
[ Ian Campbell ]
* Support $LINUX_KERNEL_CMDLINE_DEFAULTS via /etc/defaults/flash-kernel. This
will be prepended to the ${bootargs} and can therefore be overridden by the
firmware configuration. Suggested as part of #813023.
* Fix debug logging intended to help with #781742.
[ Vagrant Cascadian ]
* Update db entry for Firefly-RK3288 to allow armmp-lpae.
flash-kernel (3.58) unstable; urgency=medium
[ Martin Michlmayr ]
* Add entries for Wandboard i.MX6 Dual Lite Board rev B1 and Quad
Board rev B1. Thanks Heinrich Schuchardt. (Closes: #813893)
* Ensure FK_ETC_MACHINE isn't used when testing get_machine.
(Closes: #814710).
flash-kernel (3.57) unstable; urgency=medium
[ Colin Watson ]
* Use HTTPS for Vcs-Git URL.
[ Roger Shimizu ]
* Fix the install location for etc/README.dtbs
* Update kernel address for Buffalo Linkstation devices machine db.
(Closes: #810828)
* Update a few Buffalo Linkstation entries in machine db
The following device will be converted to DT in kernel 4.6:
- Buffalo Linkstation Pro/Live (LS-GL)
The following device will be supported by DT in kernel 4.6:
- Buffalo Linkstation LS-QVL (DT will be supported in kernel 4.6)
The following devicies' DT will be renamed in kernel 4.6:
- Buffalo Linkstation LS-VL
- Buffalo Linkstation LS-WSXL
- Buffalo Linkstation LS-WVL
- Buffalo Linkstation LS-WXL
* Update support status of Buffalo Linkstation devices in README
[ Martin Michlmayr ]
* Add Kernel-Flavors for Lamobo R1. Thanks to Heinrich Schuchardt.
(Closes: #813927)
* Add new marvell kernel flavour as alternative for orion5x and
kirkwood.
flash-kernel (3.56) unstable; urgency=medium
[ Martin Michlmayr ]
* QNAP TS-109/TS-209 and TS-409: change the kernel address to be after
the ramdisk so the uncompressed kernel doesn't overwrite the ramdisk.
(Closes: #809476)
[ Vagrant Cascadian ]
* Update Cubieboard4 entry to generate uImage and uInitrd loadable by
the vendor u-boot, which doesn't support boot scripts.
flash-kernel (3.55) unstable; urgency=medium
[ Vagrant Cascadian ]
* Add a machine db entry for BeagleBoard-X15.
flash-kernel (3.54) unstable; urgency=medium
[ Martin Michlmayr ]
* Add test_db test suite to README.
* Remove lpae as kernel flavour from DB-MV784MP-GP since armmp-lpae
is listed already.
* Add support for Seagate NAS (2 and 4 bay) and Seagate Personal
Cloud (1 and 2 bay).
flash-kernel (3.53) unstable; urgency=medium
[ Vagrant Cascadian ]
* Add a machine db entry for Firefly-RK3288.
flash-kernel (3.52) unstable; urgency=medium
[ Eric Cooper ]
* Correctly test endianess on NSLU2 (Closes: #804359)
* Add option to avoid creation of .bak files (Closes: #803115)
[ Ian Campbell ]
* Succeed but do nothing when run on an unknown machine which was booted via
EFI. Based on a patch from Newell Jensen. (Closes: #806171)
* Use /dev/mtdN when flashing, rather than needlessly going through the
mtdblock layer (which is problematic on some platforms/kernels).
(Closes: #794265)
* Keep a backup copy of any files written to either a filesystem mounted via
Boot-Device or directly to a flash device under /var/backups/flash-kernel.
This makes files which are not normally visible via the regular filesystem
available e.g. for convenient backing up (Closes: #736503)
flash-kernel (3.51) unstable; urgency=medium
[ Vagrant Cascadian ]
* Fix typo with distro_bootpart handling in u-boot generic bootscript.
* Fix syntax errors when testing for empty variables in uboot-generic,
cubox-i, and wandboard bootscripts. Thanks to Rick Thomas for the
report (Closes: #805856).
* Add a machine db entry for Kosagi Novena Dual/Quad.
* Add a machine db entry for Lamobo R1.
flash-kernel (3.50) unstable; urgency=medium
[ Ian Campbell ]
* Only remove directories which exist.
[ Karsten Merker ]
* Add a machine db entry for the Iomega Iconnect.
flash-kernel (3.49) unstable; urgency=medium
[ Vagrant Cascadian ]
* Consistently use "setenv" in boot scripts, as some u-boot variants do
not support using "=" for variable assignment.
flash-kernel (3.48) unstable; urgency=medium
[ Vagrant Cascadian ]
* Update beaglebone, sunxi and u-boot generic boot scripts to support
distro_bootpart variable added in u-boot mainline.
* Update wandboard and cubox-i boot scripts to improve distro_bootcmd
support.
[ Ian Campbell ]
* Avoid waiting for Ctrl-C if any debconf frontend is in use, not just
non-interactive. (Closes: #791794)
flash-kernel (3.47) unstable; urgency=medium
[ Roger Shimizu ]
Various machine db updates for Buffalo Linkstation systems (Closes: #802578):
* Re-order machine db entries for "Buffalo Linkstation" series
- move up entry: Buffalo Linkstation LS-XHL
* Add machine db entries for a few Buffalo Linkstation systems
newly getting DT supported since Linux 4.3:
- orion5x: LS-WTGL
- kirkwood: LS-WVL/VL
- kirkwood: LS-WXL/WSXL
* Update machine db entries for Buffalo Linkstation system converting
to DT since Linux 4.3:
- orion5x: LS-WSGL
[ Karsten Merker ]
* Add machine db entries for a number of sunxi-based systems:
- Cubietech Cubieboard4
- Ippo Q8H Quad Core Tablet (v1.2)
- Iteaduino Plus A10
- MSI Primo81 tablet
- Olimex A20-Olimex-SOM-EVB
flash-kernel (3.46) unstable; urgency=medium
[ Karsten Merker ]
* Add machine db entries for various sunxi-based systems which are
(at least partially) supported in linux-image-4.2.0:
- Allwinner A23 Evaluation Board
- Allwinner GA10H Quad Core Tablet (v1.1)
- Auxtek t004 A10s hdmi tv-stick
- ET Q8 Quad Core Tablet (v1.6)
- Gemei G9 Tablet
- Jesurun Q5
- LinkSprite pcDuino3 Nano
- Mele A1000G Quad top set box
- Mele I7 Quad top set box
- mk808c
- Orange Pi
- Orange Pi Mini
- Sinlinx SinA33
- Utoo P66
- Wexler TAB7200
* Change Vcs-Browser entry to use cgit instead of gitweb on alioth.
* Disable the use of modprobe and udevadm in the mtdblock() function
while running the testsuite.
flash-kernel (3.45) unstable; urgency=medium
[ Karsten Merker ]
* Add machine db entries for various sunxi-based systems which are
(at least partially) supported in linux-image-4.0.0-2:
- Allwinner A31 APP4 EVB1 Evaluation Board
- BA10 tvbox
- Chuwi V7 CW0825
- CSQ CS908 top set box
- HAOYU Electronics Marsboard A10
- HSG H702
- Hyundai A7HD
- I12 / Q5 / QT840A A20 tvbox
- Ippo Q8H Dual Core Tablet (v1.2)
- Ippo Q8H Dual Core Tablet (v5)
- Mele M3
- Mele M9 top set box
- Merrii A20 Hummingbird
- Merrii A31 Hummingbird
- Merrii A80 Optimus Board
- MK802
- MK802ii
- MK802-A10s
- R7 A10s hdmi tv-stick
flash-kernel (3.44) unstable; urgency=medium
[ Ian Campbell ]
* Add support for "Udoo i.MX6 Quad Board" using entry from Michael
Fladischer. Also add a similar entry for "Udoo i.MX6 Dual-lite Board" based
on that but with the appropriate dtb. (Closes: #789192)
flash-kernel (3.43) unstable; urgency=medium
[ Ian Campbell ]
* Combine i.MX53 QSB and LOCO board entries, they are the same thing and the
LOCO variant was missing DTB information. (Closes: #788782)
flash-kernel (3.42) unstable; urgency=medium
* Only install bootscripts relevant to the arch.
* Use correct variable name in bootscr.sunxi (Closes: #788221)
* Avoid use of && and || for control flow in boot scripts, the precedence is
not as expected.
* Change Vcs-Browser entry from http to https.
flash-kernel (3.41) unstable; urgency=medium
* Improvements to generic u-boot boot script, based on a patch from Vagrant
Cascadian (Closes: #783074):
- If ${console} is set then add "console=${console}" to the bootargs.
- Boot the kernel using the versioned filenames in preference to the
generic symlinks.
- Log which kernel (if known) and device we are booting from.
- Workaround lack of baudrate included with console on various iMX
system.
* Install dtbs into /boot/dtbs/$kvers. Based on a patch from Vagrant
Cascadian. Retain links at /boot/dtb and /boot/dtb-$kvers (Closes: #783073)
* Switch boot scripts using $kvers to boot a specific kernel (rather than via
the vmlinuz symlink) to prefer ${fk_kvers} if set in the environment,
allowing a rudimentary ability to select which kernel to boot.
flash-kernel (3.40) unstable; urgency=medium
* Fix regression in bootscr.beaglebone (syntax error, woops).
flash-kernel (3.39) unstable; urgency=medium
* Add support for distro_bootcmd when using u-boot >= 2015.04+dfsg1-1
by adjusting bootscr.beaglebone: use results from distro_bootcmd and
use previous settings as a fallback (Closes: #786367). Thanks,
Vagrant Cascadian!
flash-kernel (3.38) unstable; urgency=medium
[ Updated translations ]
* Portuguese (Brazil) (pt_BR.po) by Adriano Rafael Gomes
flash-kernel (3.37) unstable; urgency=medium
* Upload changes from 3.30~exp.1..3.36~exp.1 to unstable.
* Improvements to support for PlatHome OpenBlocks AX3-4 board
(Closes: #783323):
- Allow armmp-lpae kernel flavour.
- Remove Boot-Device option since this platform can boot from /boot.
* Handle Boot-Kernel-Image even if none of Dtb-Append, Machine-Id or
U-Boot-Kernel-Address are specified. Patch from David Lechner.
(Closes: #783278)
* Log some debug if either the kernel or the initrd is missing. Intended to
help debug one aspect of #781742.
flash-kernel (3.36) unstable; urgency=medium
[ Vagrant Cascadian ]
* Add entries for SolidRun HummingBoard DL/Solo and SolidRun
HummingBoard Dual/Quad. (Closes: #783769)
[ Christian Perrier ]
* Update standards to 3.9.6 (checked)
* No longer hardcode the path to /bin/true, which will no longer
trigger a lintian warning and doesn't seem to be needed
anyway
flash-kernel (3.36~exp.1) experimental; urgency=medium
* Team upload.
* Merge up changes from 3.35
flash-kernel (3.35) unstable; urgency=medium
* Team upload.
[ Karsten Merker ]
* Pass the u-boot console variable to the kernel in bootscr.cubox-i
and bootscr.wandboard. (Closes: #782016)
* Add a machine db entry for the Wandboard Dual Lite / Solo,
supplied by Vagrant Cascadian.
flash-kernel (3.35~exp.1) experimental; urgency=medium
* Merge up changes from 3.34
flash-kernel (3.34) unstable; urgency=medium
* Update u-boot-tools to Recommends. In practice it is needed on most systems
but having it installed only by flash-kernel-installer means it is missed
in manual configurations. (Closes: #780994)
flash-kernel (3.34~exp.1) experimental; urgency=medium
* Merge up changes from 3.33
flash-kernel (3.33) unstable; urgency=medium
[ Karsten Merker ]
* Add a machine db entry for the LeMaker Banana Pro.
flash-kernel (3.33~exp.1) experimental; urgency=medium
* Merge up changes from 3.32.
flash-kernel (3.32) unstable; urgency=medium
[ Karsten Merker ]
* Add a machine db entry for the Olimex A20-OLinuXino-LIME2.
flash-kernel (3.31~exp.1) experimental; urgency=medium
* Merge up changes from 3.30.
* Add support for Nvidia Jetson TK1.
* Allow DTB-Id to be an absolute file name.
(Based on a patch from Uwe Kleine-Koenig, Closes: #767744)
* Search for DTB files in /etc/flash-kernel/dtbs before the kernel, allowing
local overrides.
* Install bootscripts under /etc/flash-kernel/dtbs and treat as conffiles,
allowing for local modifications.
flash-kernel (3.30) unstable; urgency=medium
[ Ian Campbell ]
* Support for TI OMAP5 uEVM board (Patch from Chen Baozi, Closes: #773255)
* Support for alternative machine name for BeagleBone Black. The old name was
ambiguous with the original BeagleBone (often called "White"), detect if
booting on a BeagleBone white and print an error since the DTB will be
wrong. We don't currently support the White. (Closes: #773890)
* Ensure mtdblock driver is loaded before accessing /dev/mtdblock*.
(Closes: #773991)
[ Karsten Merker ]
* Add a machine db entry for the LinkSprite pcDuino3
flash-kernel (3.30~exp.1) experimental; urgency=medium
* Append a DTB to all platforms using the kirkwood flavour from v3.17-rc1
onwards since all board file support has been removed from the kernel.
* Autodetect correct DTB for kirkwood based QNAP devices.
* Upstate to standards version 3.9.6. No changes required.
* This is the same as 3.29~exp.1 which was uploaded to unstable and then
superseded.
flash-kernel (3.29) unstable; urgency=medium
* Correct Content-Transfer-Encoding in zn_CH.po.
* No other changes vs 3.28, this supersedes the brown paper bag upload of
3.29~exp.1 to unstable.
flash-kernel (3.28) unstable; urgency=medium
[ Ian Campbell ]
* Support for Olimex A20-OLinuXino-LIME. Patch from Christian Kastner.
(Closes: #764968)
flash-kernel (3.27) unstable; urgency=medium
[ Ian Campbell ]
* Install initrd with correct name (uInitrd) on Xgene so that the filename
boot.scr are consistent.
flash-kernel (3.26) unstable; urgency=medium
[ Ian Campbell ]
* Install a symlink to the latest dtb in /boot/dtb and keep a backup of the
actual file.
* Add a generic u-boot boot.scr using the upstream config_distro_bootcmd.h
infrastructure.
* Add support for the Arndale board.
* Install uImage and uRamdisk to /boot on Xgene platform and load dtb from
the correct path.
[ Karsten Merker ]
* Add support for the LeMaker Banana Pi.
* bootscr.sunxi: If the u-boot environment variable ${console} is set,
pass its contents as console device to the kernel.
flash-kernel (3.25) unstable; urgency=medium
* Log some clues on how to fix overly large initramfs (Closes: #760215).
* Improved mtd partition size checks.
* Switch Uploaders to use my @debian.org address.
flash-kernel (3.24) unstable; urgency=medium
[ Karsten Merker ]
* Modify bootscript/bootscr.sunxi to work with the new default environment
and bootcmd handling introduced by mainline u-boot v2014.10 as well as
with the old environment still used by u-boot-sunxi.
* Avoid "file not found" messages while iterating over the possible
locations for kernel images in bootscr.sunxi.
flash-kernel (3.23) unstable; urgency=medium
* Avoid stalling install when debconf frontend is noninteractive. Patch from
David Lechner. (Closes: #753059)
* Append command line options from
/etc/default/flash-kernel:LINUX_KERNEL_CMDLINE to ${bootargs} rather than
replacing it entirely. (Closes: #751816)
flash-kernel (3.22) unstable; urgency=medium
[ Ian Campbell ]
* Add support for BeagleBone (black). Patch from Vagrant Cascadian.
(Closes: #751353)
* Add support for Wandboard i.MX6 Quad Board. Patch from Vagrant Cascadian.
(Closes: #751340)
* Add support for D-Link DNS-320 NAS (Rev A1). Stanza from Bastien ROUCARIES.
(Closes: #724891)
* Document Mtd-Kernel and Mtd-Initrd in README.
flash-kernel (3.21) unstable; urgency=medium
[ Ian Campbell ]
* Bootloader-Sets-Incorrect-Root machine db entry is now optional and
defaults to no.
* Purge debconf database on purge. Patch from Vagrant Cascadian.
(Closes: #751066)
* Add support for SolidRun Cubox-i Dual/Quad. Patch from Vagrant Cascadian.
(Closes: #750953)
* Document FK_MACHINE in the manpage. (Closes: #751012)
* Document /etc/flash-kernel/machine and the database files in the manpage.
* Add kernel command line configuration support to sunxi bootscript.
[ Karsten Merker ]
* Add machine db entries for various sunxi-based systems
- Cubietech Cubieboard
- Cubietech Cubieboard2
- INet-97F Rev 02
- LinkSprite pcDuino
- Mele A1000
- Miniand Hackberry
- Olimex A10-OLinuXino-LIME
- Olimex A10s-Olinuxino Micro
- Olimex A13-Olinuxino
- Olimex A13-Olinuxino Micro
- Olimex A20-Olinuxino Micro
- PineRiver Mini X-Plus
- WITS A31 Colombus Evaluation Board
flash-kernel (3.20) unstable; urgency=medium
[ dann frazier ]
* Add kernel commandline configuration support
* Add support for prepending arbitrary u-boot commands to a bootscript
* Add arm64 support
* Add support for APM X-Gene Mustang boards
* Add support for Calxeda Highbank
flash-kernel (3.19) unstable; urgency=low
* Support kernel flavours with a hyphen in (e.g. armmp-lpae).
* Allow armmp-lpae kernel and add u-boot-tools on cubietruck.
* Run installer udeb on arm*/generic subarch iff the machine is listed in the
db.
* Copy dtb to /boot when directly invoked as well.
flash-kernel (3.18) unstable; urgency=medium
[ Ian Campbell ]
* Add --force option to install a specific kernel version.
* Add support for the Cubietruck.
* Copy the dtb (if any) to /boot/dtb-$kversion in kernel postinst hook.
* Allow use of the kernel version in boot scripts.
flash-kernel (3.17) unstable; urgency=medium
* Accept kernels with an additional "+" suffix (Closes: #743796)
* Add myself to Uploaders
flash-kernel (3.16) unstable; urgency=low
[ Steve McIntyre ]
* Add support for the Marvell Armada XP GP Board, booting via DTB.
(Closes: #743222)
[ Christian Perrier ]
* Updated Standards to 3.9.5 (checked)
flash-kernel (3.15) unstable; urgency=low
[ Ian Campbell ]
* Handle machine name difference for DT based DockStar (Closes: #741692)
* Do not mark uInitrd as compressed. The kernel can decompress the initramfs
itself as needed. (Closes: #618029)
* Add support for Globalscale Mirabox. From Jasmin Schnatterbeck.
(Closes: #739976).
* Handle removal of highest kernel version (Closes: #735093). Patch from
Karsten Merker.
* Add armmp to the Kernel-Flavors for all mx5 platforms.
flash-kernel (3.14) unstable; urgency=low
[ Ian Campbell ]
* Append DTB on "Seagate FreeAgent DockStar" from v3.12 onwards.
* Add support for Buffalo Linkstation LS-XHL (Closes: #740786).
flash-kernel (3.13) unstable; urgency=low
[ Ian Campbell ]
* Correctly handle probing for android boot partition (Closes: #683329).
* Rename Bootloader-Sets-Root to Bootloader-Sets-Incorrect-Root which better
reflects its usage.
* Forcibly override root only if Bootloader-Sets-Incorrect-Root is yes,
rather than when it is not no. Avoids overridding root on unknown platforms
(Closes: #718761).
* Transition additinal kirkwood systems to DT from v3.12 onwards. Board
support for these was removed in that release:
- Globalscale Technologies eSATA SheevaPlug
- LaCie Internet Space v2
- LaCie Network Space v2
* Consistently install DTB file next to uImage where the latter is on a
filesystem rather than partition.
flash-kernel (3.12) unstable; urgency=medium
* Append a DTB on Sheevaplug from kernel version 3.12 onwards. Based on a
patch by Marc Kleine-Budde. (Closes: #731345).
* Append a DTB on Guruplug from kernel version 3.12 onwards. Based on a patch
from William Boughton. (Closes: #734769).
* Allow multiple Machine names per stanza in the db.
* Correct check for debconf, avoiding hang on error when running in Debian
Installer. (Closes: #721485).
* Add support for "Buffalo Linkstation LS-CHLv2" (Closes: #734130).
* Add support for "Plat'Home OpenBlocksA6" (Closes: #725754).
flash-kernel (3.11) unstable; urgency=low
[ Updated translations ]
* Tajik (tg.po) by Victor Ibragimov
flash-kernel (3.10) unstable; urgency=low
[ Ian Campbell ]
* Honour FK_MACHINE in get_machine, to allow initramfs hooks etc to
work inside a chroot. Also support reading the machine from
/etc/flash-kernel/machine.
* Add capability to read /etc/flash-kernel/db to override db entries.
Closes: #680900
flash-kernel (3.9) unstable; urgency=low
[ Nobuhiro Iwamatsu ]
* support kernel entry point setup of mkimage
* support PlatHome OpenBlocks AX3-4 board
[ Updated translations ]
* Tajik (tg.po) by Victor Ibragimov
flash-kernel (3.8) unstable; urgency=low
[ Dmitrijs Ledkovs ]
* Set debian source format to '3.0 (native)'.
* Bump debhelper compat level to 9.
* Set Vcs-* to canonical format.
[ Cyril Brulebois ]
* Fix test_db testsuite to be LC_COLLATE-independent, by calling sort -u
on both the $expected and $fields variables. Closes: #711759
[ Christian Perrier ]
* Update Standards to 3.9.4 (checked)
flash-kernel (3.7) unstable; urgency=low
[ Wouter Verhelst ]
* Remove $SELF from uploaders.
[ Martin Michlmayr ]
* The machine database is case-sensitive so ensure that all instances
of "Required-Packages" are capitalized correctly. Closes: #693839
[ Loïc Minier ]
* Add test_db testsuite for the database; currently only checking for
unknown fields.
* Rename Bootloader-sets-root field to Bootloader-Sets-Root for consistency
in CamelCasing.
flash-kernel (3.6) unstable; urgency=low
[ Roger Leigh ]
* flash-kernel-installer postinst: Update FSCKFIX in
/etc/default/fsck as well as /etc/default/rcS for backward
compatibility. The purpose is to use /etc/default/fsck for
new installations. Closes: #694928
flash-kernel (3.5) unstable; urgency=low
* Revert "Move u-boot-tools to Depends so that the mkimage program
is available." as there have been some objections. Reopens: #693839
flash-kernel (3.4) unstable; urgency=low
* Move u-boot-tools to Depends so that the mkimage program
is available. This will allow installing the kernel on Linkstation
Pro/Live. Closes: #693839
flash-kernel (3.3) unstable; urgency=low
* Replace XC-Package-Type by Package-Type
* Add myself to Uploaders
[ Updated translations ]
* Lithuanian (lt.po) by Rimas Kudelis
flash-kernel (3.2) unstable; urgency=low
[ Ian Campbell ]
* Use get_machine in flash-kernel-installer udeb. Fixes flash-kernel at
install time on Dreamplug failure to install u-boot-tools.
flash-kernel (3.1) unstable; urgency=low
* Release into unstable.
flash-kernel (3.1~exp.1) experimental; urgency=low
[ Ian Campbell ]
* Add support for FDT based devices using /proc/device-tree/model for
detection.
* Add support for installing a DTB file into the boot partition.
* Add support for appending a DTB to the kernel.
* Add support for DreamPlug. (Closes: #667681)
[ Hector Oron ]
* Update Standards-Version to 3.9.3
* Set Boot-Device for Dreamplug to /dev/sda1.
[ Updated translations ]
* Galician (gl.po) by Jorge Barreiro
* Croatian (hr.po) by Tomislav Krznar
flash-kernel (3.0) unstable; urgency=low
[ Aurelien Jarno ]
* Drop old arm and armeb architectures from the control file.
[ Updated translations ]
* Tibetan (bo.po) by Tennom
* Welsh (cy.po) by Dafydd Tomos
* Basque (eu.po) by Piarres Beobide
* Lithuanian (lt.po) by Rimas Kudelis
* Latvian (lv.po) by Rūdolfs Mazurs
* Macedonian (mk.po) by Arangel Angov
* Panjabi (pa.po) by A S Alam
flash-kernel (3.0~rc.5) unstable; urgency=low
* Add support for FK_MACHINE and FK_PROC_CPUINFO.
- Makes it possible to pass machine name for use under chrooted setups.
Setting FK_MACHINE to none avoids flash-kernel run.
Thanks Johannes Schauer for patch.
* Add support for LaCie Kirkwood NASes.
Thanks Simon Guinot for patch. (Closes: #670938)
-- Balint Reczey <email address hidden> Fri, 26 Jan 2018 22:05:44 +0100
