Ubuntu
qemu package

qemu 1:8.1.3+ds-1ubuntu1 source package in Ubuntu

Changelog

qemu (1:8.1.3+ds-1ubuntu1) noble; urgency=medium

  * Merge with Debian unstable (LP: #2044425, #2039700). Remaining changes:
    - qemu-kvm to systemd unit
      - d/qemu-kvm-init: script for QEMU KVM preparation modules, ksm,
        hugepages and architecture specifics
      - d/qemu-system-common.qemu-kvm.service: systemd unit to call
        qemu-kvm-init
      - d/qemu-system-common.install: install helper script
      - d/qemu-system-common.qemu-kvm.default: defaults for
        /etc/default/qemu-kvm
      - d/rules: call dh_installinit and dh_installsystemd for qemu-kvm
    - Distribution specific machine type
      (LP 1304107 1621042 1776189 1761372 1761372 1776189)
      - d/p/ubuntu/define-ubuntu-machine-types.patch: define distro machine
        types containing release versioned machine attributes
      - Add an info about -hpb machine type in debian/qemu-system-x86.NEWS
      - ubuntu-q35 alias added to auto-select the most recent q35 ubuntu type
    - Enable nesting by default
      - d/p/ubuntu/enable-svm-by-default.patch: Enable nested svm by default
        in qemu64 on amd
        [ No more strictly needed, but required for backward compatibility ]
    - tolerate ipxe size change on migrations to >=18.04 (LP 1713490)
      - d/p/ubuntu/pre-bionic-256k-ipxe-efi-roms.patch: old machine types
        reference 256k path
      - d/control-in: depend on ipxe-qemu-256k-compat-efi-roms to be able to
        handle incoming migrations from former releases.
    - Ease the use of module retention on upgrades (LP 1913421)
      - debian/qemu-block-extra.postinst: enable mount unit on install/upgrade
    - Remaining GCC-12 FTBFS (LP 1988710 + LP 1921664)
      + d/p/u/qboot-Disable-LTO-for-ELF-binary-build-step.patch:
        fix qboot FTBFS with LTO
    - d/p/u/lp2003673-*.patch: Enable passthrough of IBM Z crypto
      hardware to Secure Execution guests. (LP #2003673)
  * Drop changes:
    - d/rules: Incorporate the following changes from Debian unstable, in
      order to fix the FTBFS caused by -fcf-protection:
      + d/rules: move icons install rules to install-misc section
      + d/rules: stop running whole thing with dh, take back *-indep sequence
      + d/rules: implement arch-dependent install/build targets without dh too
      [ Fixed in Debian. ]
    - d/rules: Get rid of binary-helper target; explicitly invoke its
      commands under binary-{arch,indep}.  This makes the build succeed
      again in Ubuntu, where binary-helper wasn't being properly invoked.
      [ Fixed in Debian. ]
    - d/p/u/lp2003673-update-linux-headers-6.3rc5.patch,
      d/p/u/lp2003673-update-linux-headers-6.5rc1.patch,
      d/p/u/lp2003673-s390x-fix-missing-subsystem-reset-registration.patch:
      Drop some of the patches to Enable passthrough of IBM Z crypto
      hardware to Secure Execution guests. (LP #2003673)
      [ Applied upstream. ]

 -- Sergio Durigan Junior <email address hidden>  Wed, 22 Nov 2023 21:34:19 -0500

Upload details

Uploaded by:
Sergio Durigan Junior
Uploaded to:
Noble
Original maintainer:
Ubuntu Developers
Architectures:
any all
Section:
misc
Urgency:
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section

Downloads

File Size SHA-256 Checksum
qemu_8.1.3+ds.orig.tar.xz 38.2 MiB c6daf2a6a1e77fbd38955c2e3962b860286d31624f6afeecb0b21b73d8d5d3b7
qemu_8.1.3+ds-1ubuntu1.debian.tar.xz 160.8 KiB 0650677189ce8fcc88cb0bc42af9c7ce8d5035afcc541f1f4009faabdc5e7a7b
qemu_8.1.3+ds-1ubuntu1.dsc 9.0 KiB c5ca2b96e3658fddfd25565e0e90119bb2a95a9677afaee6d29ddb605bc710ac

View changes file

Binary packages built by this source

qemu-block-extra: extra block backend modules for qemu-system and qemu-utils

 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides extra block device backend modules for qemu-system
 emulation and qemu-img from qemu-utils package, which are rarely used and
 has extra dependencies.

qemu-block-extra-dbgsym: debug symbols for qemu-block-extra
qemu-guest-agent: Guest-side qemu-system agent

 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides a daemon (agent) to run inside qemu-system
 guests (full system emulation). It communicates with the host using
 a virtio-serial channel org.qemu.guest_agent.0, and allows one to perform
 some functions in the guest from the host, including:
  - querying and setting guest system time
  - performing guest filesystem sync operation
  - initiating guest shutdown or suspend to ram
  - accessing guest files
  - freezing/thawing guest filesystem operations
  - others.
 .
 Install this package on a system which is running as guest inside
 qemu virtual machine. It is not used on the host.

qemu-guest-agent-dbgsym: debug symbols for qemu-guest-agent
qemu-system: QEMU full system emulation binaries

 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This metapackage provides the full system emulation binaries for all supported
 targets, by depending on all per-architecture system emulation packages which
 QEMU supports.

qemu-system-arm: QEMU full system emulation binaries (arm)

 QEMU is a fast processor emulator: currently the package supports
 ARM emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following arm hardware: aarch64 (arm64) arm (armel armhf).
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals. It enables easier testing and debugging of system
 code. It can also be used to provide virtual hosting of several virtual
 machines on a single server.

qemu-system-arm-dbgsym: debug symbols for qemu-system-arm
qemu-system-common: QEMU full system emulation binaries (common files)

 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides common files needed for target-specific
 full system emulation (qemu-system-*) packages.

qemu-system-common-dbgsym: debug symbols for qemu-system-common
qemu-system-data: QEMU full system emulation (data files)

 This package provides architecture-neutral data files
 (such as keyboard definitions, icons) for system-mode
 QEMU emulation (qemu-system-*) packages.

qemu-system-gui: QEMU full system emulation binaries (graphical display and audio modules)

 This package provides optional graphical guest display modules (currently GTK
 and SDL) and audio backend modules for full system emulation (qemu-system-*)
 packages.
 .
 This package is not a management/control/GUI interface for qemu, use something
 else (like virt-manager) for that.

qemu-system-gui-dbgsym: debug symbols for qemu-system-gui
qemu-system-mips: QEMU full system emulation binaries (mips)

 QEMU is a fast processor emulator: currently the package supports
 MIPS emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following mips hardware: mips mipsel mips64 mips64el.
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals. It enables easier testing and debugging of system
 code. It can also be used to provide virtual hosting of several virtual
 machines on a single server.

qemu-system-mips-dbgsym: debug symbols for qemu-system-mips
qemu-system-misc: QEMU full system emulation binaries (miscellaneous)

 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides the full system emulation binaries to emulate
 various other hardware which did not made into separate packages.
 Emulators for the following architectures are provided:
  alpha avr cris hppa m68k loongarch64 (loong64) microblaze microblazeel
  nios2 or1k riscv32 riscv64 rx sh4 sh4eb tricore xtensa xtensaeb.
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals. It enables easier testing and debugging of system
 code. It can also be used to provide virtual hosting of several virtual
 machines on a single server.

qemu-system-misc-dbgsym: debug symbols for qemu-system-misc
qemu-system-modules-opengl: QEMU full system emulation binaries (OpenGL display modules)

 This package provides optional OpenGL display support modules for QEMU full
 system emulation (qemu-system-*) packages. It also provides dbus display type.

qemu-system-modules-opengl-dbgsym: debug symbols for qemu-system-modules-opengl
qemu-system-modules-spice: QEMU full system emulation binaries (spice display modules)

 This package provides optional spice display (qxl and spice-app) and audio
 support modules for QEMU full system emulation (qemu-system-*) packages.

qemu-system-modules-spice-dbgsym: debug symbols for qemu-system-modules-spice
qemu-system-ppc: QEMU full system emulation binaries (ppc)

 QEMU is a fast processor emulator: currently the package supports
 PowerPC emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following PowerPC hardware: ppc (powerpc) ppc64 (ppc64le ppc64el).
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals. It enables easier testing and debugging of system
 code. It can also be used to provide virtual hosting of several virtual
 machines on a single server.

qemu-system-ppc-dbgsym: debug symbols for qemu-system-ppc
qemu-system-s390x: QEMU full system emulation binaries (s390x)

 QEMU is a fast processor emulator: currently the package supports
 s390x emulation. By using dynamic translation it achieves reasonable
 speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following s390x hardware: s390x.
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals. It enables easier testing and debugging of system
 code. It can also be used to provide virtual hosting of several virtual
 machines on a single server.

qemu-system-s390x-dbgsym: debug symbols for qemu-system-s390x
qemu-system-sparc: QEMU full system emulation binaries (sparc)

 QEMU is a fast processor emulator: currently the package supports
 SPARC emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following sparc hardware: sparc sparc64.
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals. It enables easier testing and debugging of system
 code. It can also be used to provide virtual hosting of several virtual
 machines on a single server.

qemu-system-sparc-dbgsym: debug symbols for qemu-system-sparc
qemu-system-x86: QEMU full system emulation binaries (x86)

 QEMU is a fast processor emulator: currently the package supports
 i386 and x86-64 emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following x86 hardware: i386 x86_64 (amd64).
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals. It enables easier testing and debugging of system
 code. It can also be used to provide virtual hosting of several virtual
 machines on a single server.
 .
 On x86 host hardware this package also enables KVM kernel virtual machine
 usage on systems which supports it.

qemu-system-x86-dbgsym: debug symbols for qemu-system-x86
qemu-system-x86-xen: QEMU full system emulation binaries (x86)

 The former qemu-system-x86-xen binaries are now in qemu-system-xen.
 .
 This is a transitional package. You can safely remove it.

qemu-system-xen: QEMU full system emulation (Xen helper package)

 This package provides the i386 system emulation binary to work
 together with the Xen hypervisor for some types of DomUs.
 This package is not useful by its own.

qemu-system-xen-dbgsym: debug symbols for qemu-system-xen
qemu-user: QEMU user mode emulation binaries

 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides the user mode emulation binaries. In this mode
 QEMU can launch Linux processes compiled for one CPU on another CPU.
 .
 If qemu-user-binfmt package is also installed, it will register binary
 format handlers from this qemu-user package with the kernel so it will
 be possible to run foreign binaries directly. However, this might not
 be suitable for using inside foreign chroots, in which case it is
 possible to use qemu-user-static package instead of qemu-user-binmft, --
 qemu-user-static will register statically linked binfmt handlers instead.

qemu-user-binfmt: QEMU user mode binfmt registration for qemu-user

 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides binfmt support registration for the user mode
 emulation binaries from qemu-user. This is an empty package, it does
 not contain any additional files, only registration scripts which run
 at install and remove times.

qemu-user-dbgsym: debug symbols for qemu-user
qemu-user-static: QEMU user mode emulation binaries (static version)

 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides the user mode emulation binaries, built
 statically. In this mode QEMU can launch Linux processes compiled for
 one CPU on another CPU.
 .
 qemu-user-static package will register binary formats which the provided
 emulators can handle, so that it will be possible to run foreign binaries
 directly.

qemu-user-static-dbgsym: debug symbols for qemu-user-static
qemu-utils: QEMU utilities

 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides QEMU related utilities:
  * qemu-img: QEMU disk image utility
  * qemu-io: QEMU disk exerciser
  * qemu-nbd: QEMU disk network block device server

qemu-utils-dbgsym: debug symbols for qemu-utils