gnuradio 3.10.7.0-1 source package in Ubuntu
Changelog
gnuradio (3.10.7.0-1) unstable; urgency=medium * New upstream release Runtime - Setting the minimum buffer size should have the desired effect now, and not be overwritten. NOTE: the value returned by min_buffer_size() is not intended to indicate the actual buffer size. Header Payload Demod was the only block attempting to use this value, and was corrected. - Use a set to store thread group (more efficient) - Message Debug can now output via the logging system - The field prefs.singleton is no longer externally exposed (was unintentional) - PMT dict can be generated more easily using pmt::dict_from_mapping() GRC - Save changes under all exit conditions (a couple were previously missed) - Prevent silent Generate/Run failures for unsaved flowgraphs Testing - Add Fedora 38, using the clang compiler - Remove EOL Fedora 36 gr-analog - C++ code generation for Quadrature Demod - Add max_gain parameter for AGC gr-blocks - Probe Rate adds a name parameter, for clearer logging - Selector has a new "sync" more that consumes the same number of items from all inputs. Default is now to consume as many items as possible from the active input, and no more than that many items from other inputs. The previous behavior was, well, broken. - Throttle reset item count on restart, to avoid long delays gr-digital - Constellation Encoder and Decoder: constellation can be changed at runtime gr-filter - Filter design tool: multiple improvements in bounds checking and exception handling - Filter design tool: update QMessageBox to work in Qt5 gr-network - Multiple memory management errors fixed in UDP Source/Sink and TCP Sink gr-soapy - Better AGC and gain behavior in RTL, AirspyHF and SDRPlay blocks - Support bias controls in RTL and SDRPlay blocks gr-uhd - Remove possibility of infinite recursion for network overruns - Support fmtlib v10 - RFNoC: bindings and block yml for Vector IIR, Replay and Log Power blocks - RFNoC: add S16 format to RX Streamer gr-vocoder - Support additional codec2 modes Modtool - Don't override user-defined CMAKE_INSTALL_PREFIX * start gr-video-sdl2 patch to port to SDL 2, depend upon libsdl1.2-compat-dev for now. -- A. Maitland Bottoms <email address hidden> Sat, 15 Jul 2023 21:46:56 -0400
Upload details
- Uploaded by:
- A. Maitland Bottoms
- Uploaded to:
- Sid
- Original maintainer:
- A. Maitland Bottoms
- Architectures:
- any all
- Section:
- comm
- Urgency:
- Medium Urgency
See full publishing history Publishing
Series | Published | Component | Section |
---|
Downloads
File | Size | SHA-256 Checksum |
---|---|---|
gnuradio_3.10.7.0-1.dsc | 5.1 KiB | 4b69d28b3365b0474a99c39bae32f86e82183f2940bc9bec6f83690945e9057e |
gnuradio_3.10.7.0.orig.tar.gz | 4.2 MiB | 55156650ada130600c70bc2ab38eee718fc1d23011be548471e888399f207ddc |
gnuradio_3.10.7.0-1.debian.tar.xz | 37.0 KiB | 1dda517c012eeba94beebb21a27ade69b6de0f88a4817498f7ae711f1371d280 |
Available diffs
- diff from 3.10.5.1-3 to 3.10.7.0-1 (100.8 KiB)
No changes file available.
Binary packages built by this source
- gnuradio: GNU Radio Software Radio Toolkit
GNU Radio provides signal processing blocks to implement software
radios. It can be used with readily-available low-cost external RF
hardware to create software-defined radios, or without hardware in a
simulation-like environment. It is widely used in hobbyist, academic
and commercial environments to support both wireless communications
research and real-world radio systems.
.
GNU Radio applications are primarily written using the Python
programming language, while the supplied performance-critical signal
processing path is implemented in C++ using processor floating-point
extensions, where available. Thus, the developer is able to implement
real-time, high-throughput radio systems in a simple-to-use,
rapid-application- development environment.
.
While not primarily a simulation tool, GNU Radio does support
development of signal processing algorithms using pre-recorded or
generated data, avoiding the need for actual RF hardware.
.
This package contains the gnuradio-companion, a graphical tool for
creating signal flow graphs and generating flow-graph source code.
Also included are a variety of tools and utility programs.
- gnuradio-dbgsym: debug symbols for gnuradio
- gnuradio-dev: GNU Software Defined Radio toolkit development
Header files for the GNU Radio software defined radio system.
Since GNU Radio is a framework for development of SDR
applications, you are likely to need this installed.
.
Part of the main gnuradio build.
- gnuradio-doc: GNU Software Defined Radio toolkit documentation
Documentation for the GNU Radio software defined radio system
in html and xml form.
.
Part of the main gnuradio build.
- libgnuradio-analog3.10.7: gnuradio analog functions
Library for handling analog signal processing functions.
These functions are also in gnuradio-core.
Part of the main gnuradio build.
- libgnuradio-analog3.10.7-dbgsym: debug symbols for libgnuradio-analog3.10.7
- libgnuradio-audio3.10.7: gnuradio audio functions
This is the gr-audio library, used to connect to audio sources
(mic-in) and sinks (speaker-out) ports on a computer. The underlying
hardware driver is system and OS dependent and this module should
automatically discover the correct one to use. Part of the main
gnuradio build.
- libgnuradio-audio3.10.7-dbgsym: debug symbols for libgnuradio-audio3.10.7
- libgnuradio-blocks3.10.7: gnuradio blocks functions
Some non-signal processing blocks.
These functions are also in gnuradio-core.
Part of the main gnuradio build.
- libgnuradio-blocks3.10.7-dbgsym: debug symbols for libgnuradio-blocks3.10.7
- libgnuradio-channels3.10.7: gnuradio channels functions
Some channel oriented processing blocks.
These functions are also in gnuradio-core.
Part of the main gnuradio build.
- libgnuradio-channels3.10.7-dbgsym: debug symbols for libgnuradio-channels3.10.7
- libgnuradio-digital3.10.7: gnuradio digital communications functions
All the functions for doing digital modulation and demodulation,
including bpsk, qpsk, gmsk and ofdm signals.
Part of the main gnuradio build.
- libgnuradio-digital3.10.7-dbgsym: debug symbols for libgnuradio-digital3.10.7
- libgnuradio-dtv3.10.7: gnuradio digital TV signal processing blocks
ATSC support, gr-atsc ported to a new framework, as well as
DVB-S2, DVB-T, DVB-T2 digital video broadcast standards.
Part of the main gnuradio build.
- libgnuradio-dtv3.10.7-dbgsym: debug symbols for libgnuradio-dtv3.10.7
- libgnuradio-fec3.10.7: gnuradio forward error correction support
Handle forward error correction processing in gnuradio.
Implements the GNU Radio FEC API, supporting encoders and
decoders for no-op dummmy, repetition, and convolutional classes.
Part of the main gnuradio build.
- libgnuradio-fec3.10.7-dbgsym: debug symbols for libgnuradio-fec3.10.7
- libgnuradio-fft3.10.7: gnuradio fast Fourier transform functions
Library for Fourier transform techniques used in gnuradio.
Uses single precision FFT from libfftw3-single3.
Part of the main gnuradio build.
- libgnuradio-fft3.10.7-dbgsym: debug symbols for libgnuradio-fft3.10.7
- libgnuradio-filter3.10.7: gnuradio filter functions
Library of filter blocks used in gnuradio. Implements
FIR, IIR and FFT filters, as well as Polyphase filterbank and
PFB arbitrary resampler methods.
Part of the main gnuradio build.
- libgnuradio-filter3.10.7-dbgsym: debug symbols for libgnuradio-filter3.10.7
- libgnuradio-iio3.10.7: IIO blocks for GnuRadio
Libiio is a library that has been conceived to ease the development of
applications interfacing Industrial Input/Output (IIO) devices through
the IIO subsystem of the Linux kernel.
.
The IIO blocks for GnuRadio can be used to create flowgraphs that interface
IIO devices through libiio.
.
Part of the main gnuradio build.
- libgnuradio-iio3.10.7-dbgsym: debug symbols for libgnuradio-iio3.10.7
- libgnuradio-network3.10.7: gnuradio network library
Library of blocks that implement UDP and TCP source and
sink blocks supporting both IPv4 and IPv6.
Part of the main gnuradio build.
- libgnuradio-network3.10.7-dbgsym: debug symbols for libgnuradio-network3.10.7
- libgnuradio-pdu3.10.7: gnuradio streaming protocol library
Protocol Data Units library provides signal processing
blocks that operate on Protocol Data Unit format messages. Many
such blocks are analogs of streaming API functionality.
Part of the main gnuradio build.
- libgnuradio-pdu3.10.7-dbgsym: debug symbols for libgnuradio-pdu3.10.7
- libgnuradio-pmt3.10.7: gnuradio pmt container library
Polymorphic Types are opaque data types that are designed as generic
containers of data that can be safely passed around between blocks
and threads in GNU Radio.
Part of the main gnuradio build.
- libgnuradio-pmt3.10.7-dbgsym: debug symbols for libgnuradio-pmt3.10.7
- libgnuradio-qtgui3.10.7: gnuradio Qt graphical user interface functions
QT-based graphical sinks for gnuradio applications.
Implements opengl, raster and native plotting methods, and
supports a QT Style Sheet (QSS) file to adjust the look.
Part of the main gnuradio build.
- libgnuradio-qtgui3.10.7-dbgsym: debug symbols for libgnuradio-qtgui3.10.7
- libgnuradio-runtime3.10.7: gnuradio core runtime
Top level component library. Defines core blocks. Handles
settings for logging, performance counters, and control port.
Part of the main gnuradio build.
- libgnuradio-runtime3.10.7-dbgsym: debug symbols for libgnuradio-runtime3.10.7
- libgnuradio-soapy3.10.7: gnuradio SoapySDR support
Soapy hardware drivers using the SoapySDR driver framework.
Part of the main gnuradio build.
- libgnuradio-soapy3.10.7-dbgsym: debug symbols for libgnuradio-soapy3.10.7
- libgnuradio-trellis3.10.7: gnuradio trellis modulation functions
Library for trellis coding modulation, including the Viterbi
Algorithm, Concatenated Coding and Turbo Decoding
based upon finite state machine (FSM) class.
Part of the main gnuradio build.
- libgnuradio-trellis3.10.7-dbgsym: debug symbols for libgnuradio-trellis3.10.7
- libgnuradio-uhd3.10.7: gnuradio universal hardware driver functions
The gnuradio interface to the UHD library to connect to and send and
receive data between to the Ettus Research, LLC product line -
including the USRP family of software radio peripheral devices.
Part of the main gnuradio build.
- libgnuradio-uhd3.10.7-dbgsym: debug symbols for libgnuradio-uhd3.10.7
- libgnuradio-video-sdl3.10.7: gnuradio video functions
Library for handling SDL (Simple DirectMedia Layer) video data.
Implements input and output blocks.
Part of the main gnuradio build.
- libgnuradio-video-sdl3.10.7-dbgsym: debug symbols for libgnuradio-video-sdl3.10.7
- libgnuradio-vocoder3.10.7: gnuradio vocoder functions
Library of vocoder blocks, including ulaw, alaw, gsm and codec2.
Debian uses external libraries for gsm and codec2.
.
Part of the main gnuradio build.
- libgnuradio-vocoder3.10.7-dbgsym: debug symbols for libgnuradio-vocoder3.10.7
- libgnuradio-wavelet3.10.7: gnuradio wavelet functions
Library of Daubechies wavelet function blocks.
wvps computes the Wavelet Power Spectrum from
a set of wavelet coefficients.
.
Part of the main gnuradio build.
- libgnuradio-wavelet3.10.7-dbgsym: debug symbols for libgnuradio-wavelet3.10.7
- libgnuradio-zeromq3.10.7: gnuradio zeromq functions
0MQ messaging library support. Provide network socket
endpoints for gnuradio data and message streams.
PUB/SUB, PUSH/PULL, REP/REQ models supported.
.
Part of the main gnuradio build.
- libgnuradio-zeromq3.10.7-dbgsym: debug symbols for libgnuradio-zeromq3.10.7