Too many files matching vmlinuz*
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
Linaro Image Tools |
New
|
Undecided
|
Unassigned |
Bug Description
linaro-media-tools as of revision 438
root@neptune:~# ~tgall/
I see...
Device Mount point Size
/dev/sda none 152627MB
/dev/sda1 / 146899MB
/dev/sda2 none 5726MB
/dev/sda5 none 5726MB
/dev/sdb none 0MB
/dev/sdc none 7580MB
/dev/sdc1 none 51MB
/dev/sdc2 none 7528MB
/dev/sdd none 0MB
/dev/sde none 0MB
/dev/sr0 none 0MB
Are you 100% sure, on selecting [/dev/sdc] (y/n)? y
-------
Installing (linaro-
Unpacking hardware pack ...Done
Updating apt package lists ...
Ign file: ./ InRelease
Ign file: ./ Release.gpg
Ign file: ./ Release
Ign file: ./ Translation-en
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Get:1 http://
Hit http://
Hit http://
Hit http://
Get:2 http://
Get:3 http://
Hit http://
Get:4 http://
Get:5 http://
Hit http://
Hit http://
Hit http://
Get:6 http://
Hit http://
Ign http://
Get:7 http://
Hit http://
Ign http://
Get:8 http://
Get:9 http://
Ign http://
Ign http://
Get:10 http://
Ign http://
Ign http://
Hit http://
Hit http://
Ign http://
Ign http://
Hit http://
Hit http://
Ign http://
Ign http://
Get:11 http://
Get:12 http://
Ign http://
Ign http://
Get:13 http://
Get:14 http://
Ign http://
Ign http://
Get:15 http://
Get:16 http://
Ign http://
Ign http://
Hit http://
Hit http://
Get:17 http://
Get:18 http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Fetched 15.1 MB in 1min 48s (139 kB/s)
Reading package lists...
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
hwpack-
linux-
The following packages will be upgraded:
devio flash-kernel wireless-crda
3 upgraded, 6 newly installed, 0 to remove and 2 not upgraded.
Need to get 0 B/27.6 MB of archives.
After this operation, 348 kB disk space will be freed.
WARNING: The following packages cannot be authenticated!
wireless-crda linux-image-
linux-firmware linux-image-
uboot-mkimage
Install these packages without verification [y/N]? y
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 33968 files and directories currently installed.)
Preparing to replace wireless-crda 1.14 (using .../wireless-
Unpacking replacement wireless-crda ...
Selecting previously deselected package linux-image-
Unpacking linux-image-
Done.
Preparing to replace devio 1.2-1build1 (using .../devio_
Unpacking replacement devio ...
Preparing to replace flash-kernel 2.28ubuntu34 (using .../flash-
Unpacking replacement flash-kernel ...
Selecting previously deselected package linux-firmware.
Unpacking linux-firmware (from .../linux-
Selecting previously deselected package linux-image-
Unpacking linux-image-
Selecting previously deselected package hwpack-
Unpacking hwpack-linaro-omap3 (from .../hwpack-
Selecting previously deselected package u-boot-tools.
Unpacking u-boot-tools (from .../u-boot-
Selecting previously deselected package uboot-mkimage.
Unpacking uboot-mkimage (from .../uboot-
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up wireless-crda (1.14) ...
Setting up linux-image-
Running depmod.
update-initramfs: deferring update (hook will be called later)
Examining /etc/kernel/
run-parts: executing /etc/kernel/
run-parts: executing /etc/kernel/
update-initramfs: Generating /boot/initrd.
/bin/df: Warning: cannot read table of mounted file systems: No such file or directory
run-parts: executing /etc/kernel/
Setting up devio (1.2-1build1) ...
Setting up flash-kernel (2.28ubuntu34) ...
Setting up linux-firmware (1.60) ...
Setting up linux-image-
Setting up hwpack-linaro-omap3 (20111003-0) ...
Setting up u-boot-tools (2011.06-3ubuntu1) ...
Setting up uboot-mkimage (2011.06-3ubuntu1) ...
Reading package lists... Done
Building dependency tree
Reading state information... Done
linux-image-
linux-image-
linux-firmware set to automatically installed.
u-boot-tools set to automatically installed.
uboot-mkimage set to automatically installed.
N: This command is deprecated. Please use 'apt-mark auto' and 'apt-mark manual' instead.
Done
Cleaning up ...Done
-------
proc umounted
Checking that no-one is using this disk right now ...
OK
partition ends on cylinder 1023, beyond the end of the disk
Warning: partition 1 does not end at a cylinder boundary
If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
(See fdisk(8).)
Formating boot partition
mkfs.vfat 3.0.9 (31 Jan 2010)
Formating root partition
mke2fs 1.41.12 (17-May-2010)
Filesystem label=rootfs
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
482384 inodes, 1927168 blocks
96358 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=1975517184
59 block groups
32768 blocks per group, 32768 fragments per group
8176 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 39 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
`/tmp/tmpBKVdxY
Traceback (most recent call last):
File "/home/
args.is_live, args.is_lowmem, args.consoles)
File "/home/
rootfs_uuid, boot_disk, boot_device_
File "/home/
cls.
File "/home/
os.
File "/home/
raise ValueError("Too many files matching '%s' found." % regex)
ValueError: Too many files matching '/tmp/tmpowF7OF